Advertisement
For TVs connected to Sonifi
1.
Press and Hold Down both the SETUP and POWER buttons at the same time,until the LED light
turns on and remains ON.
2.
Enter the two digit direct access number for your TV Systems from the list below; the LED light will
then turn off confirming it was accepted.
3.
Test the remote to ensure it operates all your TV System's features. If not, try the next code listed.
Codes For Sonifi® Lodgenet® or OnCommand® Systems
The most common code is 02, you can also try 06, 05, 07, 08 or 10, 01, 03, 04 and 11.
Codes For Sonifi® Systems Operating with Samsung® IPTV - The code is 13.
Codes For Cruise Line Systems - The codes are 14, 15, 16, 17, 21, 02, 05, or 06
To Return the Remote to TV Only mode or return to the factory default
Press and hold the SETUP button down, then press and hold the CC button down at the same time until
the red LED light blinks quickly 3 times, then release both buttons. You have now reset the code list back
to the beginning. For TV only operation see Page 1, Step 1.
®
®
Sonifi
, Lodgenet
and On Command
Clean Remote® is a registered trademark of Noso Control LLC Copyright© 2022, Noso Control, LLC
, Lodgenet®, OnCommand
®
®
are registered trademarks of Sonifi Solutions.
or Cruise Line
®
CR2M* Version 6
ystems
S
2
Advertisement
