HTC Herald Service Manual page 43

Gap between other mating parts.
9
Stylus near key (gap)
10
APP KEY around GAP
2. (Step inspection )
1. Step between upper / lower slid parts.
2. Others between upper / lower parts.
Cosmetic inspection:
1. (Scratch )
Description
Class 2/ stylus
Class 4
label
HTC confidential
© 2006, HTC CORPORATION. ALL RIGHTS RESERVED.
Description
Class 1/Class 2 /Class 3
Exposure of substratum is not acceptable
Scratch : L≦7mm ,W≦0.25mm ,N≦3, S≧10mm
Bright mark area should be less than 1 mm x 10 mm
Any damaged marks, shortage of plating and printing are
not acceptable.
Wrong printing or illegible print be not allowed.
A,B part (gap) <0.3 mm, around stylus (gap) <0.65
mm
C part (gap) <0.3 mm
A,B parts (gap) <0.3 mm, Stylus near key
(gap) :0.4mm
Edge of C-part (gap) <0.3 mm
B/C-part front and rear GAP Tolerance<0.1mm
GAP≦0.9mm(
Key stuck are not allowed
& APP key hight≦0.9mm
(Step) < 0.50 mm
(Step) < 0.40 mm
A c c e p t c r i t e r i a
TOTAL 58
)
A c c e p t c r i t e r i a
CONT.ON. 44 PAGE NO. 43
Minor
Minor
L e v e l
Minor
Minor
L e v e l
Minor
Minor
Minor