Advertisement

User Manual / Installation Guide
Model No. P080VG / P080VR / P080VP
Warning!
It will cause malfunction if the monitor is operating with unspecified power supply adaptor
or incorrect power voltage. Do not expose this unit in the rain or moisture environment to reduce the
risk of fire or electric shock.
PRECAUTIONS
Do not use the monitor near water.
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a
person and cause serious damage to the appliance. Use only a cart or stand recommended by the
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting
kit approved by the manufacturer and follows the kit instructions.
The monitor should be operated with type of power adaptor indicated on the label.
Normally it is packed with monitor, or using an adaptor approved by the manufacturer.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will
protect the monitor from being damaged due to power surges.
Never spill liquids on the monitor.
Do not attempt to service the monitor yourself; opening or removing covers can damage to the
monitor or panel. Please refer all servicing to qualified service personnel.
For Wall mount adaptor, wall socket shall be installed near the equipment and shall be easily
accessible.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P080VG and is the answer not in the manual?

Questions and answers

Summary of Contents for Phistek P080VG

  • Page 1 User Manual / Installation Guide Model No. P080VG / P080VR / P080VP Warning! It will cause malfunction if the monitor is operating with unspecified power supply adaptor or incorrect power voltage. Do not expose this unit in the rain or moisture environment to reduce the risk of fire or electric shock.
  • Page 2: Table Of Contents

    Index: Introduction --------------------------------------------------------------------------------------------------- 3 Features--------------------------------------------------------------------------------------------------------- 3 Unpack the monitor------------------------------------------------------------------------------------------ 3 Check Accessories-------------------------------------------------------------------------------------------- 3 Installation----------------------------------------------------------------------------------------------------- 4 Power Supply & Signal connection ---------------------------------------------------------------------- 4 Function Touch Key Control ------------------------------------------------------------------------------ 4 OSD Lock/ Unlock -------------------------------------------------------------------------------------------- 5 Structure of OSD settings----------------------------------------------------------------------------------- 5 III. For your safety------------------------------------------------------------------------------------------------ 6 Support timing chart ---------------------------------------------------------------------------------------- 6 5 Wires Resistive Touch Panel ----------------------------------------------------------------------------- 6 Projected Capacitive Touch Panel ------------------------------------------------------------------------ 14...
  • Page 3: Introduction

    - Rimless front bezel design, spill & dust proof. - Cable management down routing through the mounting stand. - Light weight. - Mitsubishi PMMA cover lens for P080VG. - 5 wires resistive touch screen panel for P080VR. - Projected Capacitive Touch panel for P080VP.
  • Page 4: Installation

    Installation: Power Supply & Signal connection:  Power supply: Use attached Wall-mount Power adaptor to get 12Vdc power. VGA signal: Use attached 1.8 meter 15pin D-sub VGA cable to connect System PC. Function Key Control:  Power Use the power switch to turn the power ON or OFF. We recommend turning your system power on first, then the LCD monitor.
  • Page 5: Osd Lock/ Unlock

    a. Press Menu key to activate OSD Menu. b. This key also means “OK”. Menu - Press “Up” or “Down” key to move the indicator to the desired item, then (MENU) press Menu key to select and read to adjust. - After adjustment, press this key to return to previous Menu.
  • Page 6: For Your Safety

    English − Francais − Deutsch − Press Up/Down key to move OSD bar to desired language, then Italino − Language press to confirm. The OSD Menu will change to desired Espanol − language and return to Main Menu. − 日本語 −...
  • Page 7 Touch Driver installation: Please go to the EETI website to get Touch Driver https://www.eeti.com/drivers.html 1.0 Download driver and run the installation. Screen display as below, please click Next>.
  • Page 8 2.0 Select the setup type, don’t tick the box if PS2 interface is not required, Click “Next> 3.0 RS232 interface driver installed is default, please click Next>...
  • Page 9 4.0 You can select to do Touch screen calibration after system boot up or not. Default setting is” None” 5.0 Select to use Multi-Monitor system, then press Next>...
  • Page 10 6.0 Choose destination location, default folder location shown as below. Press Next> 7.0 Figure shown below, please press Next> to complete installation.
  • Page 11 Calibration 1.0 Execute “eGalaxTouch” 2.0 Click “Tools” tab and click “4 Points Calibration”...
  • Page 12 3.0 Four Calibration points will appear on screen sequentially, please to press the center of circle on screen in 15 seconds one by one. 4.0 After finish 4 points calibration the diagram will appear as follow.
  • Page 13 5.0 Click “Tools” tab and click “Linearization”. 6.0 Nine Calibration points will appear on screen sequentially, please to press the center of circle on screen one by one.
  • Page 14: Projected Capacitive Touch Panel

    7.0 After finish all linearization calibration the diagram will appear as follow. Projected Capacitive Touch Panel (For Projected Capacitive Touch Model only): Projected Capacitive Touch panel: Type : Projected Capacitive Touch Control Type : USB Transmission : 85% Touch Control Driver : eGalax Touch driver (Mouse emulation driver) or supported by driver embedded in OS after windows 7 Touch Driver installation:...
  • Page 15: Mechanical Dimension

    VII. Mechanical dimension...
  • Page 16: Emc Warning Statement

    VIII. EMC Warning: FCC Class A Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 17: Product General Specification

    Product General Specification: Model P080VG P080VR P080VP LCD Panel Size 8" Resolution 800 x 600 Aspect Ratio Contrast Ratio (Typ.) 500:1 Brightness (Typ., cd/m² ) MTBF (Min., hrs) 20,000 Front Cover 10-points 5-wires resistive Type PMMA projected touch Surface Hardness...

This manual is also suitable for:

P080vrP080vp

Table of Contents