Table of Contents
Advertisement
Quick Links
U
U
Warning!
It will cause malfunction if the monitor is operating with unspecified power supply adaptor
or incorrect power voltage. Do not expose this unit in the rain or moisture environment to reduce the
risk of fire or electric shock.
PRECAUTIONS
Do not use the monitor near water.
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a
person and cause serious damage to the appliance. Use only a cart or stand recommended by the
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting
kit approved by the manufacturer and follows the kit instructions.
The monitor should be operated with type of power adaptor indicated on the label.
Normally it is packed with monitor, or using an adaptor approved by the manufacturer.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This
will protect the monitor from being damaged due to power surges.
Never spill liquids on the monitor.
Do not attempt to service the monitor yourself; opening or removing covers can damage to the
monitor or panel. Please refer all servicing to qualified service personnel.
For Wall mount adaptor, wall socket shall be installed near the equipment and shall be easily
accessible.
s
e
r
M
a
n
u
a
l
s
e
r
M
a
n
u
a
l
M
o
d
e
l
N
o
.
M
o
d
e
l
N
o
.
/
I
n
s
t
a
l
l
a
t
i
o
/
I
n
s
t
a
l
l
a
t
i
o
P
1
5
0
V
R
/
P
1
P
1
5
0
V
R
/
P
1
n
G
u
i
d
e
n
G
u
i
d
e
5
0
V
G
5
0
V
G
1
Advertisement
Table of Contents
Related Manuals for Phistek P150VR
Summary of Contents for Phistek P150VR
- Page 1 Warning! It will cause malfunction if the monitor is operating with unspecified power supply adaptor or incorrect power voltage. Do not expose this unit in the rain or moisture environment to reduce the risk of fire or electric shock. PRECAUTIONS Do not use the monitor near water.
-
Page 2: Table Of Contents
OSD Lock/ Unlock -------------------------------------------------------------------------------------------- 5 Structure of OSD settings----------------------------------------------------------------------------------- 5 III. For your safety------------------------------------------------------------------------------------------------ 7 Support timing chart ---------------------------------------------------------------------------------------- 7 Resistive Touch Panel(P150VR only)-------------------------------------------------------------------- 7~11 Touch Driver installation ---------------------------------------------------------------------------------- 8~11 Mechanical dimension------------------------------------------------------------------------------------- 12 VII. EMC Warning Statement----------------------------------------------------------------------------------- 13 FCC Class A Warning ---------------------------------------------------------------------------------------- 13... -
Page 3: Introduction
Introduction P150VR / P150VG is a 15 inch color TFT LCD monitor, with compact and ecological design. This monitor produces clear images with the vivid color at resolutions from VGA up to XGA and used with graphics adapter of scanning frequency from 30KHz to 62KHz in horizontal sweep while vertical refresh rate is 55Hz to 76 Hz continuously. -
Page 4: Installation
(Mini USB cable VGA cable to wall to PC) for to System P150VR only Capacitive Touch Key Control Power Use the power switch to turn the power ON or OFF. We recommend turning your system power on first, then the LCD monitor. -
Page 5: Osd Lock/ Unlock
a. Press Menu key to activate OSD Menu b. This key also means “OK”; Menu Press “Up, Down” key to move the indicator to the desired item, then press (MENU) Menu key to select and read to adjust. After adjustment, press this key to return to previous Menu. a. - Page 6 Press “UP” or “DOWN” to choose three types of color 9300K temperature 9300°k, 6500°k, sRGB and user define. 6500K − sRGB Green Color Select User Preset to enter Color Adjust Menu, Blue Select desired color to adjust User Preset Exit Select “Exit”...
-
Page 7: For Your Safety
66.67 − − Mode 10 720 x 400 28.32 31.47 70.08 − Resistive Touch Panel: (P150VR only) Panel: Type : Five-Wires Analog Resistive Input Mode : Stylus or Fingers Transparency : 80% +/- 5% Build-in Touch Control Module: (Note: For Panel Touch Control, user need to connect upstream cable to System PC) -
Page 8: Touch Driver Installation
Touch Driver installation: (P150VR only) The attached CD include EETI Touch Driver 1.0 Screen display as below, please click Next>. - Page 9 2.0 Select the set up type, don’t tick the box if PS2 interface is not required, Click “Next> 3.0 RS232 interface driver installed is default, please click Next>...
- Page 10 4.0 You can select to do Touch screen calibration after system boot up or not Default setting is” None” 5.0 Select to use Multi-Monitor system, then press Next>...
- Page 11 6.0 Choose destination location, default folder location shown as below. Press Next> 7.0 Figure shown below, please press Next> to complete installation...
-
Page 12: Mechanical Dimension
Mechanical dimension... -
Page 13: Emc Warning Statement
VII. EMC Warning: FCC Class A Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 14: Product General Specification
Input Frequency H: 30 - 62 kHz ; V: 55-76Hz Cover Lens Mitsubishi PMMA Hardness>5H(JIS D0202), (P150VG only) T >90% Resistive Touch Panel (P150VR only) Type Five-Wire Analog Resistive Input Mode Stylus or Finger Touch Control type Touch Control Driver...
Need help?
Do you have a question about the P150VR and is the answer not in the manual?
Questions and answers