Installation may require more than one person. Ensure the equipment is not powered during installation and wiring of the system. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 4
This guide is specific to the SPEEDCHECK-12 replacement rear enclosure lock installation and is not a replacement for the complete SPEEDCHECK-12 product user manual. Visit support.carmanah.com to download the complete product user manual. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
The following tools and materials may be required to install the replacement rear enclosure lock into your SPEEDCHECK-12 system: 1. Socket set with 1” socket Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
If you cannot gain access to the system due to a damaged lock, you will need to drill out the lock. Ensure all metal chips are removed to prevent system damaged caused by short circuits. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
7. To close, push the display enclosure against the rear enclosure and then apply diagonal pressure in the bottom right corner of the sign face. Once fully closed then PUSH the lock to secure in place. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...