GE Centricity MP3510 User Manual page 40

Cleaning the exterior
v Do not open the machine for cleaning. No components inside the
machine require maintenance or cleaning by the user.
1
Switch off the Digitizer by following the procedure as described in
off the Centricity™ MP3510'
2
Remove the power plug from the socket.
3
Wipe the exterior of the Digitizer with a clean, soft, damp cloth.
Use a mild soap or detergent if required but never use an ammonia–based cleaner.
Be careful not to get any liquid in the power cord port.
Take extreme care that no water infiltrates the machine !
4
Plug in the Digitizer and switch it on by following the procedure as described
in 'Switching on the Centricity™ MP3510'
40
on page 23 .
on page
'Switching
21 .
5001A EN 20020315