Product Description; Before First Use; Control Panel Layout - Concept2 CK7001 Manual

EN

PRODUCT DESCRIPTION

1 Pressure valve
2 Pressure lid
3 Float valve
4 Sealing
5 Rice spoon
1
2
5
6
7

CONTROL PANEL LAYOUT

Delay Start Set the time by which to delay the start of cooking.
Start/Cancel Start or cancel the cooking after selecting the
appropriate program.
Reheat
Reheating the food.
Keep Warm The appliance keeps the food warm.
46
6 Condensate container
7 Measuring cup
8 Inner container
9 Appliance body
10 Control panel
8
3
4
9
10

BEFORE FIRST USE

• Remove all packaging materials from the appliance.
• Remove all labels and stickers from the appliance.
• Wash the inner container (8) with hot water.
• Wipe the appliance thoroughly from the inside and outside with a cloth.
OPERATING INSTRUCTIONS
USING THE COOKER WITH PRESSURE LID (2)
1. Place the appliance in a dry, level place.
2. Place the condensate container (6) in the appliance as shown in the Fig. 1.
3. Prepare the pressure lid (2) as shown in the Fig. 2.
•
Pull the metal protrusion on the underside of the lid to remove the
protective cover on which the sealing (4) is fitted. The sealing (4) can
be removed and cleaned. Make sure that the sealing (4) is not damaged
or torn. If so, it needs to be replaced. Make sure that the float valve (3) is
clean and can move freely.
4. Grab the pressure lid (2), turn the handle clockwise and lift the lid
vertically upwards.
5. Take out the inner container (8). The total volume of foods and water
should not exceed 2/3 of the volume of the inner container.
6. Make sure that the inner surface of the appliance (9) is dry and place
the inner container (8) in the body of the appliance (9).
7. Place the pressure cover (2) on the appliance and turn it
counterclockwise until you hear a click. The lid is now in the correct
position.
8. Please bear in mind that the pressure valve (1) must be freely movable
for the cooker to function properly.
9. Set the pressure valve to the "Sealed" position, the cooker is now ready
for use.
10. Plug the power cord into a power outlet.
11. Press the button with name of the required program to select the program. Press the Start/Cancel button to
confirm. The cooker will start to heat to the required temperature and the float valve will start to rise. Once the
cooker reaches the required temperature, it will start to count down the set time. At this point the appliance is
already cooking under pressure, the lid is locked and the cooker cannot be opened. NEVER TRY TO OPEN THE
COOKER BY FORCE!
12. When cooking is complete, you will hear a sound signal and the cooker will automatically switch to the "Keep
Warm" mode to keep the food warm.
13. You can cancel the setting of the cooker at any time by pressing the Start/Cancel button.
When cooking is complete, the pressure can be released in two ways:
1. When cooking is complete, the pressure will gradually decrease. Depending on the amount of liquid, this may take
15-30 minutes. The float valve gradually drops, the lid unlocks and can be opened easily. If it cannot be opened,
wait for a bit longer. NEVER OPEN THE COOKER BY FORCE!
2. When cooking is complete, press the Start/Cancel button, wear a pot holder and turn the float valve to the "Steam
release" position, the float valve will drop, the lid will unlock and can be opened easily. BE VERY CAREFUL AND USE
PROTECTIVE EQUIPMENT, RISK OF STEAM SCALDING!
Delay Start function:
1. Using the Delay Start function, you can delay the start of cooking by up to 24 hours.
2. Follow the operating instructions, press the button with the name of the selected program, then press the Delay
Start button and use the "+" and "-" buttons to set the time by which you want to delay the start of cooking. The
CK7001 CK7001
EN
Fig. 1
Sealed
Fig. 2
Steam release
47