Raising/Lowering The Bed Rails - Probasics 8035 Assembly, Installation And Operating Instructions

RAISING/LOWERING THE BED RAILS

NOTE: The bed rails have two positions, raised (UP) and lowered (down).
RAISING
1.
Pull plunger pin and grasp the top support of the bed rail.
2.
Pull up on bed rail and release the plunger pin.
3.
Pull up on bed rail until the plunger pin engages the adjustment hole. An
audible "click" will be heard.
LOWERING
1.
Grasp the top support of the bed rail and pull plunger pin.
2. Lower the bed rail and release the plunger pin.
Lower bed rail until the top support is resting on the bed rail mounting bracket.
3.
BED RAIL IN RAISED (UP) POSITION
.
. .
. .
.
FIGURE 3 - RAISING/LOWERING THE BED RAILS
Bed Rail (Top Support)
Plunger Pin
(locked into
Adjustment Hole)
BED RAIL IN LOWERED (DOWN)
POSITION
. .
.
.
Bed Rail Mounting
Bracket (Top)
5
Bed Rail
(Top Support)
Bariatric Bed Rail