Advertisement
Set device in pairing mode
When the device is first turned on, it may
enter pairing mode (the Up arrow will be
flashing).
If not automatically in pairing mode when powered
manually set the device in pairing mode by holding
(left button) and Stop Button (middle button)
simultaneously until the 'Up' arrow begins flashing
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Electrical > Smart Blinds
Driver).
7.
Ensure that the device is in pairing mode, with the example of indicator, and tap
"Confirm light is rapidly flashing".
automatically
continuously
on, you can
the 'Up' arrow
in blue.
9
Advertisement
