Advertisement
CONFIGURATION
Running direction
With the chain placed on the motor, check if the running direction matches that of the
blinds. If not, there are two methods for changing the running direction.
A: Press and hold "Up" button for six seconds, until the blue light begins to flash. This
reverses the blind running direction.
B: After connection with the app is complete, you can change device motor direction by
selecting 'Motor direction' from the 'More' submenu. You will then need to reset the device
limit, as the difference in direction will change the limit.
Set device limits
1.
Push the Up Arrow (left button) until
the shades open all the way.
3.
Push and hold the
Stop Button until the
red light flashes
(about 5 seconds).
Now the blinds motor will automatically stop at the pre-set upper and lower limits. If the
range changes, please reset the device.
6
2.
4.
Once the red light
flashes push the
Down Arrow until the
shades close.
Reach high limit position, push the
Stop Button.
5.
Hit the Stop Button when
they are completely
closed. The device will
wait few seconds and
then flash.
Advertisement
