Advertisement
Please note that if the incorrect gear is selected, the chain will be noisy during operation.
Note:
This device is suited only for blinds with a looped adjustment chain, and
not suited for blinds with free-hanging cords or an adjustment wand/rod.
Attaching device to mounting bracket
Once the mounting bracket is installed, simply attach the device to the bracket via the two
grooves on the rear of the device, and slide down until it locks into place. Ensure the chain is
reasonably tight, with no slack.
Slide down until it locks into place,
ensure the chain is taut.
To remove the device from the mounting bracket, simply press in on the Release Button.
Push up from beneath, sliding up along the groove, open up back board and remove chain.
Release button
5
Advertisement
