Advertisement
Quick Links
Installation Instructions for 555-79006
4 Ton Bottle Jack
CAUTION: Before using this product, read this manual and follow all
SPECIFICATIONS
Owner and/or Operator Responsibility
The owner and/or operator shall read, study and understand the product instructions and retain them
for future reference.
Operation
The owner and/or operator shall have an understanding of the product and safety operating
instructions before operating the product. Safety information shall be emphasized and understood. If
the operator is not fluent in English, the product warnings/cautions and instructions shall be read to and
discussed with the operator in operator's native language by purchaser/owner or his designee, insuring
that the operator comprehends their content.
Inspection
(a) Visual inspection MUST be made prior to each use of the jack. Check for cracks, cracked
welds, missing or damaged parts.
(b) Keep all moving parts clean and well lubricated.
(c) Owners and/or operators should be aware that repair of this equipment may require specialized
knowledge and facilities. It is recommended that an annual inspection of the product be made
by a manufacturer or supplier's authorized repair facility and that any defective parts, decals, or
safety labels and signs be replaced with manufacturer or supplier's specified parts.
Damaged Equipment
Any jack that appears to be damaged in any way or is found to be worn or operates abnormally SHALL
BE REMOVED FROM SERVICE IMMEDIATELY UNTIL REPAIRED. It is recommended that a
manufacturer or supplier's authorized repair facility make necessary repairs if the manufacturer or
supplier permits repairs
Alterations
Because of potential hazards associated with the misuse of equipment of this type, NO
MODIFICATIONS/ALTERATIONS shall be made to the product.
Attachments and Adaptors
Only attachments and/or adaptors supplied by the manufacturer shall be used.
Safety Rules and Operational Instructions.
Capacity
4 Ton (8000 lbs.)
1-800-345-4545 jegs.com
Lift Range
8.15"-13.58"
8.15"-16.02" with screw extension
Advertisement
Related Manuals for Jegs 555-79006
Summary of Contents for Jegs 555-79006
- Page 1 Installation Instructions for 555-79006 4 Ton Bottle Jack CAUTION: Before using this product, read this manual and follow all Safety Rules and Operational Instructions. Capacity Lift Range SPECIFICATIONS 4 Ton (8000 lbs.) 8.15"-13.58" 8.15"-16.02" with screw extension Owner and/or Operator Responsibility The owner and/or operator shall read, study and understand the product instructions and retain them for future reference.
- Page 2 Because of potential hazards associated with this type of equipment, NO ALTERATIONS SHALL BE MADE to this product. Only attachments and/or adapters supplied by the manufacturer shall be used. Failure to heed these warnings may result in property damage, personal injury and/or death. 1-800-345-4545 jegs.com...
-
Page 3: Parts List
Ball ¼” Seal Seal Check Valve Kit Release Valve Handle Packing Cylinder Washer Cotter Pin O-Ring Handle Sleeve Cup Seal O-Ring Top Nut Extension Screw Packing Pump Plunger Reservoir Cup Seal Filler Plug O-Ring Packing Pump Cylinder Parts Diagram 1-800-345-4545 jegs.com... - Page 4 For added height: Before raising jack turn extension screw head (D) counter clockwise to desired position. To Lower: Open the release valve very slowly by turning counter-clockwise. Turn valve screw (A), ¼ to ½ a turn counter-clockwise Jack will slowly lower itself. Re-tighten (A) to stop jack at any desired height 1-800-345-4545 jegs.com...
-
Page 5: Troubleshooting
Hold Defective piston saddle down. Open packing. release valve and pump handle several times. Clean valves and adjust valve contact. Replace the piston packing. Erratic lift. Defective plunger Clean valves packing and/or valve. and/or packing. 1-800-345-4545 jegs.com...