Jegs 79000 Installation Instructions

Installation Instructions for 79000
2-Ton Hydraulic Jack
SPECIFICATIONS Capacity (Ton)

Owner and/or Operator Responsibility

The owner and/or operator shall read, study and understand the
product instructions and retain them for future reference.
Operation
The owner and/or operator shall have an understanding of the product
and safety operating instructions before operating the product. Safety
information shall be emphasized and understood. If the operator is not
fluent in English, the product warnings/cautions and instructions shall
be read to and discussed with the operator in operator's native
language by purchaser/owner or his designee, insuring that the
operator comprehends their content.

Inspection

(a) Visual inspection MUST be made prior to each use of the jack.
Check for cracks, cracked welds, missing or damaged parts.
(b) Keep all moving parts clean and well lubricated.
(c) Owners and/or operators should be aware that repair of this
equipment may require specialized knowledge and facilities. It
is recommended that an annual inspection of the product be
made by a manufacturer or supplier's authorized repair facility
and that any defective parts, decals, or safety labels and signs
be replaced with manufacturer or supplier's specified parts.

Damaged Equipment

Any jack that appears to be damaged in any way or is found to be worn
or operates abnormally SHALL BE REMOVED FROM SERVICE
IMMEDIATELY UNTIL REPAIRED. It is recommended that a
manufacturer or supplier's authorized repair facility make necessary
repairs if the manufacturer or supplier permits repairs

Alterations

Because of potential hazards associated with the misuse of equipment
of this type, NO MODIFICATIONS/ALTERATIONS shall be made to the
product.

Attachments and Adaptors

Only attachments and/or adaptors supplied by the manufacturer shall
be used.
Lift Range
2 5-1/8" to 13"
WARNING

Read, study and understand all instructions before operating
this device.

Do not exceed rated capacity. Over-loading may cause damage
to/or failure of the jack.

Always use only on hard, level surface. Do not use equipment
on slopes or angles.

Lifting device only. Jack must not be used as a jack stand to
hold loads for prolonged periods of time.

Immediately after lifting, support the vehicle with appropriate
means. Use jack stands in pairs to support loads. Inspect jack
stands before use as indicated by the manufacturer's owner's
manual.

Lift only on areas of the vehicle as specified by the vehicle
manufacturer's owner's manual.

Center load on the jack saddle. Off center loads can cause loss
of load or damages to load and/or equipment.

Never work directly under a supported load.

Do not move or dolly the vehicle while on the jack.

Place wheel chocks under vehicle wheels on both sides to
prevent rolling.

Use in dry, well lit areas.

Keep children and bystanders away. Children must never be
allowed in work area. Do not let children play on or around jack
or lifted load.

Any jack that appears to be damaged in any way or is found to
be worn or operates abnormally SHALL BE REMOVED FROM
SERVICE IMMEDIATELY UNTIL REPAIRED. It is
recommended that a manufacturer or supplier's authorized
repair facility make necessary repairs if the manufacturer or
supplier permits repairs.

Because of potential hazards associated with this type of
equipment, NO ALTERATIONS SHALL BE MADE to this
product.

Only attachments and/or adapters supplied by the manufacturer
shall be used.

Failure to heed these warnings may result in property damage,
personal injury and/or death.
1-800-345-4545 jegs.com