Table of Contents
Advertisement
NoteMagix M10 User's Guide
Uninstalling the battery pack
1. Make sure the M10 is turned off. Turn the M10 upside down.
2. Push the latch to
3. Carefully remove the battery.
2.2 Connecting the AC Adapter
The AC adapter allows you to power the M10 from an AC outlet and to charge the M10's
battery pack. The AC power light will glow when the device is plugged in.
To connect AC power to the M10:
1. Plug the AC adapter into the DC-in on the right side of the M10.
2. Connect the power cable to AC adapter.
3. Connect the power cable to a live electrical outlet.
Warning: The AC adapter is specially made for the Velocity Micro M10. Do not use with
other electronics and do not use other AC adapters with the M10.
14
. The battery pack will pop up a little.
www.velocitymicro.com/support
Advertisement
Table of Contents
