Philips HP6368 Manual page 9

1 Follow the steps in the chapters 'Attaching/detaching the precision trimming head' and
'Attaching/detaching the combs on the precision trimming head'.
2
comb is in contact with the skin (Fig. 13).
Note: Do not use the front part of the comb (Fig. 14).
3 Move the comb slowly against the direction of hair growth.
4 Since not all hair grows in the same direction, you need to move the appliance in
different directions (upwards, downwards and across) (Fig. 16).
5 Regularly remove cut hair from the comb.
6 To detach the comb, slide it forward with your thumb (Fig. 10).
1 Attach the precision trimming head (without comb) onto the appliance
(see chapter 'Preparing for use', section 'Attaching/detaching the precision trimming head').
2 Move the appliance towards the desired contour of your bikini line. Touch the skin lightly
with the precision trimming head (Fig. 17).
You can use the appliance:
- with the trimmer teeth vertically on the skin. Use this method to create straight lines or
other shapes. Do not make long strokes, but tap the skin lightly with the trimmer
teeth (Fig. 18).
- with the teeth of the trimming head parallel to the skin. Use this method to shorten the
hairs to a minimum length around the contours of your bikini line (Fig. 19).
Cleaning and maintenance
Always switch off and unplug the appliance before you clean it.
Never switch on the appliance while you clean it or while the cutting unit is not attached.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or
acetone to clean the appliance.
Cleaning the handle and adapter
1 Clean the handle with the cleaning brush or under a running tap.
ENGLISH
9 9