Related Manuals for TKO Air Bike
Summary of Contents for TKO Air Bike
- Page 1 PLEASE READ THIS INSTRUCTION MANUAL BEFORE YOU BEGIN ASSEMBLY Air Bike Instruction Manual...
-
Page 2: Table Of Contents
contents safety informa�on customer support assembly instruc�ons bike features explained user instruc�ons - quick start - bu�on func�ons - console display and feedback - using workout programs how to take care of your cycle troubleshoo�ng exercising with your cycle exploded diagrams and parts list... -
Page 3: Safety Informa�On
Safety Information PLEASE READ THIS INSTRUCTION MANUAL BEFORE YOU BEGIN ASSEMBLY. GREAT CARE HAS BEEN TAKEN TO DESIGN THESE INSTRUCTIONS AND FOLLOWING THEM WILL HELP YOU WITH QUICKER ASSEMBLY AND MINIMISE THE RISK OF INJURY YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY - THIS LIST IS NOT EXHAUSTIVE. •... -
Page 4: Customer Support
Care & Maintenance • Always place the equipment in a dry environment. • Use a warm, damp cloth to keep the product clean. • No wet cleaning of electrical components, unplug before any care and maintenance • The safety level of the equipment can be maintained only if it is regularly examined for damage and wear. This includes any ropes, pulleys, nuts, bolts, moving parts, bushes, chains, wheels, bearings &... -
Page 5: Assembly Instruc�Ons
Assembly Instruc�on Before you start 1. Prepare your work area - 2. Work with a friend - 3. Open the carton - 4. Unpack the carton it is important you assemble we recommend you have checking any warnings on Make sure you have the product in a clean and someone assist you with the carton and make sure you... - Page 6 1. A�ach the Front Stabilizer FIXINGS: 1-1. Remove the cardboard tube from the front end stabilizer bracket PART Loosen the two M10 x 20mm Allen Head Bolt (108) from • the cardboard tube and remove the cardboard tube. • The cardboard tube is used for packaging protec�on purposes, which won’t be used again during the assembly.
- Page 7 2. A�ach the Rear Stabilizer FIXINGS: 2-1. Remove the cardboard tube from the rear end stabilizer bracket PART • Loosen the two M10 x 20mm Allen Head Bolt (108) from the cardboard tube and remove the cardboard tube. • The cardboard tube is used for packaging protec�on purposes, which won’t be used again during the assembly.
- Page 8 3. A�ach the Dual Ac�on Handlebars TOOLS: TOOLS: 3-1. A�ach the Le� Dual Ac�on Handlebar (51) • Slide the le� Dual Ac�on Handlebar onto the pivot axle carefully. • Install the Foot Peg ( )by screwing it on,and Wrench Wrench Tighten it with the wrench as shown.
- Page 9 3-3. A�ach the Right Dual Ac�on Handlebar TOOLS: • Slide the right Dual Ac�on Handlebar (58)onto the pivot axle carefully. • Install the Foot Peg (83) by screwing it on, and Tighten it with the wrench as shown. A�ach • the End Cap (84) onto the Foot Peg (83) .
- Page 10 4. Attach the Pedals 4-1. Attach the Left Pedal • Loosen the Phillip Head Screw (109) fitted on the left Crank Arm. TOOLS: • Attach the Left Pedal (38) to the left Crank Arm and fasten with the Wrench. • Fasten the Phillip Head Screw (109) to the crank Arm with the 5mm Allen Key.
- Page 11 5. A�ach the Console Support FIXINGS: • Connect the Sensor Cable and Middle Wire together Part and then a�ach the Console Support (48) to the front end of the Main Frame (01) with two M8x30 mm Screws (105) and secure with the 5mm Allen Key. TOOLS: Be sure to fit the parts in the same order as the diagrams...
-
Page 12: Bike Features Explained
Simply turn it to adjust the height of the air bike. Transporting your air bike Your air bike has 2 transport wheels on the front stabilizer. Lift the bike from the rear end of bike and then... -
Page 13: User Instruc�Ons
Computer instruction interval target time target distance target calories target WARNING: Heart rate monitoring systems may be inaccurate.If you feel pain, faintness,or dizziness, stop exercising immediately. STOP ENTER START... -
Page 14: Quick Start
Operating the console: 1. QUICK START OPERATION Under STAND BY display, the user can enter “QUICK START” mode by pressing the “START” button. And then “TIME, DISTANCE, CALORIES” will ready to count up from zero. After starting the machine, the lever of resistance can be adjusted manually. - Page 15 3. TARGET TIME – PROGRAM Under STANDBY DISPLAY, pressing “TIME” program will enter the operation of this program. (1). Setting TIME When choosing TIME PROGRAM and pressing “ENTER”, the program switch to the default time of 30 seconds in blinking display. Press “UP/DOWN”...
-
Page 16: How To Take Care Of Your Cycle
How to Take Care of Your Cycle Storage Keep the equipment in a dry place with as little temperature variation as possible. Try to protect from dust and always unplug when not in use (if applicable). Cleaning Use a warm, damp cloth to wipe the surfaces. -
Page 17: Exercising With Your Cycle
Exercising with Your Cycle Always consult your doctor If you experience nausea, dizziness or other abnormal before undertaking a new symptoms during exercise, stop at once and consult exercise regime your doctor Starting and finishing your workout Begin and end each workout with a Warm Up / Down session – a few minutes of stretching to help prevent strains, pulls and cramps Correct cycling form How long should I exercise for? -
Page 18: Exploded Diagrams And Parts List
Expolded Diagram... - Page 19 Parts List Name of the product Q'TY Name of the product Q'TY Main Frame Adjustment board Fan wheel hub set Foot pad Fan wheel Rear foot pipe plug Fan wheel hub sleeve Console support Fan wheel hub sleeve Circular tube plug Fan hub Wire plug Bearing 6301Z...
- Page 20 Name of the product Name of the product 90 Cylindrical head socket screw M6*12 Countersunk head socket screw M6*15 91 Cylindrical head socket screw M10*40 Umbrella head socket screw M10*20 92 Cylindrical head socket screw M6*20 Cylindrical head socket screw M6*10 93 Cap M8 Umbrella head socket screw M8*50 94 Flat washer...
Need help?
Do you have a question about the Air Bike and is the answer not in the manual?
Questions and answers