Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TKO 3U
Summary of Contents for TKO 3U
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Read this Owner’s Manual and follow it’s instructions carefully before using the machine. Make sure that it is properly assembled and tightened before each use. • Inspect your machine prior to exercise to ensure that all nuts and bolts are fully tightened. - Page 3 TKO Fitness products are designed and manufactured to the highest standards in order to provide you with years of great workouts. We proudly stand behind all our products with the best customer service in the fitness industry. If you have any question or need assistance please contact us at: Customer Service: customerservice@tko.com...
-
Page 4: Before You Begin
BEFORE YOU BEGIN Note: Before starting assembly remove all parts and hardware from the carton, ensure you have everything according to the list. Display Console Handlebar Hand Grip Pulse Console Sleeve Sensor Seat Cushion Upright Post Adjustment Pull Handle Seat Post Main Frame Upright Sleeve Seat Cap... -
Page 5: List Of Components
LIST OF COMPONENTS Console Bottom Upright Post Display Console Console Bottom Sleeve Sleeve Cover Assembly Front Handlebar Upright Bottom Sleeve Main Frame Assembly Foot Pedals Front Stabilizer Rear Stabilizer... -
Page 6: Hardware Pack
HARDWARE PACK Part # Description Q’TY Lock Washer (M8) Washer (8x16x2.0t) Screw, Pan Head (M5xp0.8x25mm) Screw, Round Head (M5xp0.8x15mm) Bolt, Socket Head (M6xp1.0x15mm) Bolt, Socket Head (M8xp1.25x16mm) Bolt, Socket Head (M8xp1.25x45mm) Bolt, Socket Head (M8xp1.25x90mm) TOOLS YOU NEED (Included) COMBINATION ALLEN WRENCH WRENCH (5 &... -
Page 7: Exploded Diagram
EXPLODED DIAGRAM... -
Page 8: Parts List
PARTS LIST Item Name Q'TY Main Frame Front Stabilizer Rear Stabilizer Seat Post Upright Post Handlebar Chain Cover (Left) Chain Cover (Right) Crank Disk (L&R) Left Foot Pedal Right Foot Pedal Compression Wheel Pulley (Sprocket) Magnet Drive Belt Pressure Bracket Bushing for Seat Post Tube Decoration Cover for Stabilizer (L&R) Transportation Wheel (L&R) - Page 9 Item Name Q'TY Console Bottom Sleeve Cover (Left) Console Bottom Sleeve Cover (Right) Flywheel Tension Cable Tension Control Motor Bracket Left Crank Right Crank Axle (For Crank) Bracket for Compression Wheel Pneumatic piston Axle for Seat Adjustment Mounting Bracket Seat Adjustment Pull Handle Mounting Bracket Slider Curved Washer Cable for...
- Page 10 Item Name Q'TY Washer (21x30x1.0t) (For Part 54) Self-Tapping Screw, Round Head (M3x25mm) Self-Tapping Screw, Flat Head (M4x16mm) Self-Tapping Screw, Flat Head (M5x18mm) Screw, Pan Head (M5xp0.8x25mm) Screw, Round Head (M5xp0.8x15mm) Bolt, Round Head (M6xp1.0x10mm) Bolt, Round Head (M6xp1.0x25mm) Screw, Flat Head (M5xp0.8x12mm) Bolt, Pan Head (M8xp1.25x10mm) Bolt, Pan Head (M8xp1.25x20mm) Bolt, Button Head (M8xp1.25x16mm)
- Page 11 Item Name Q'TY Spacer (8x12x10mm) (Tension Control Motor Bracket) Lock Washer (M6) Self-Tapping Screw, Button Head (M4x16mm) (Transport Wheel) Screw, Pan Head (M5x10mm) (For Part 16)
-
Page 12: Assembly Instructions
ASSEMBLY INSTRUCTIONS STEP 1 – Base Stabilizer a. Attached the Front Stabilizer (2) to the Main Frame (1). A circular decal (“R”) should be located on the right side of the Front Stabilizer (2). b. Secure it using 2 Lock Washers (M8) (65), 2 Regular Washers (8x16x2.0t)(66) and 2 Bolts, Socket Head (M8xp1.25x90mm) (84). - Page 13 STEP – Upright Post Assembly a. Slide the Upright Sleeve(26) onto Upright Post Assembly (5) b. Attach Upright Post Assembly (5) to the Main Frame (1), using 4 Washers (8x16x2.0t) (66), 4 Lock Washers (M8) (65), and 4 Bolts, Socket Head (M8xp1.25x16mm) (82).
- Page 14 STEP 4 – Display Console Assembly a. Attached to Console Bottom Sleeve (33) to the back of the Display Console (32). Secure it with 4 Screws, Pan Head (M5 x p0.8 x 25mm) (72). b. Install the Display Console Assembly onto the metal plate that welded on top of the Upright Post Assembly (5), secure it using 4 bolts, Socket Head (M6 x p1.0 x 15mm) (81).
- Page 15 STEP 5 – Console Sleeve Assembly a. Install the Right Console Bottom Sleeve Cover (35) to the right side Handlebar (5). And the Left Console Bottom Sleeve Cover (34) to the left side Handlebar (5). Securely tighten both covers to the Upright Post Assembly (5) with 4 Screws, Round Head (M5xp0.8x15mm) (73) using Philips Screwdriver.
- Page 16 STEP 6 – Foot Pedal Assembly a. Attached the Right Foot Pedal (21)to the Right Crank (60) behind the Crank Disk (15). Threaded clockwise and tighten it securely with Wrench. b. Attached the Left Foot Pedal (20)to the Left Crank (59) behind the Crank Disk (15).
- Page 17 STEP 7 – AC Adaptor Plug the AC Adaptor (97) into the socket in the FRONT of the Bike. Your Upright Bike is now ready to use. Please make sure that all Nuts and Bolts are securely tightened before exercising.
- Page 18 ADJUSTMENTS Getting started To reduce the risk of electrical shock, always unplug the unit before cleaning or any maintainance activity. Uneven Floor After placing the unit where it will be used, check its stability. If there is even a slight rocking motion or the unit is not stable, determine which stabilizer is not resting on the floor.
- Page 19 ABOUT THE SEAT HEIGHT ADJUSTMENT Seat Adjustment a. Pull the Adjusting Handle (25) up to adjust the seat height b. Once adjusting the seat to the proper position, release the Adjusting Handle (25) until hearing the “click” sound Transport the Recumbent Cycle Hold the Rear Stabilizer (3) up with two hands and carefully move the Bike to the desired location.
Need help?
Do you have a question about the 3U and is the answer not in the manual?
Questions and answers