1. Manuals
  2. Brands
  3. S-WORKS Manuals
  4. Bicycle
  5. TT 2020
  6. User manual

S-WORKS TT 2020 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL - ENGLISH
SHIV TT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TT 2020 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for S-WORKS TT 2020

Summary of Contents for S-WORKS TT 2020

  • Page 1 USER MANUAL - ENGLISH SHIV TT...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS INTENDED USE INTENDED USE ............................1 The Shiv TT is intended and tested for Road Riding only (Condition 1). For more GENERAL NOTES ABOUT ASSEMBLY ..............1 information on intended use and structural weight limits, please refer to the TOOLS / TORQUE SPECS ........................

  • Page 3: Tools / Torque Specs

    While riding, listen for any creaks, as a creak can be a sign of a problem TOOLS / TORQUE SPECS „ with one or more components. Periodically examine all surfaces in bright WARNING! Correct tightening force on fasteners (nuts, bolts, sunlight to check for any small hairline cracks or fatigue at stress points, screws) on your bicycle is important for your safety.
  • Page 4 DESCRIPTION DIMENSIONS (mm) TOOL SIZE in-lbf DESCRIPTION DIMENSIONS (mm) TOOL SIZE in-lbf FRAME FRONT AXLE FORK REAR AXLE COCKPIT (FIG.2) FRONT DERAILEUR HANGER M4 x 12 SEATPOST (SADDLE RAIL CLAMP) M5 x 37.3 13.5 REAR DERAILLEUR HANGER M5 x 10 SEATPOST WEDGE M6 x 30 JCT A BOX COVER...
  • Page 5 DESCRIPTION DIMENSIONS (mm) TOOL SIZE in-lbf DESCRIPTION DIMENSIONS (mm) TOOL SIZE in-lbf SPACER STACK BOLT M5 x 22-82 STEM BOLTS M5 x 16 CONICAL WASHER 11.25 x 6.5 x 3 STEM NUTS M5 x 7.1 EXTENSION SOCKET M4 x 8 STEM COVER EXTENSIONS STEM COVER FRONT BOLTS...

  • Page 6: Frame Internal Routing (Di2 Wiring)

    FRAME INTERNAL ROUTING (Di2 WIRING) ELECTRONIC SHIFT WIRING - BASEBAR FRAME WIRING LENGTHS (the following lengths are suggestions only): LOCATION QTY LENGTH (mm) DOWN TUBE (SM-JC41 TO SM-JC41) 1400 SEAT TUBE (SM-JC41 TO EW-RS910) 1200 SEATPOST (BATTERY TO EW-RS910) SEAT TUBE (SM-JC41 TO FRONT DERAILLEUR) 1000mm CHAINSTAY (SM-JC41 TO REAR DERAILLEUR) HANDLEBAR ( EW-JC130, SM-JC41 TO BOTH...

  • Page 7: Seatpost Assembly

    CAUTION: Do not face the bottom bracket shell! This can prevent proper installation of the crank. Your Specialized frame does not require any bottom bracket shell pre-installation preparation, as all surfaces have been precisely machined to specific tolerances at the factory for proper interface with a threaded bottom bracket.

  • Page 8: Rear Brake Routing

    REAR BRAKE ROUTING GROMMET MINIMUM INSERTION: 75mm from top of collar GROMMET MAXIMUM Fig.11: Install a grommet (A) on the brake housing (B), then insert the „ WARNING! Seatpost INSERTION: must not make contact brake housing into the chainstay housing port. 185mm from with cutout top of collar...

  • Page 9: Front Brake Routing

    FORK / BASEBAR ASSEMBLY FRONT BRAKE ROUTING COMPRESSION RING UPPER BEARING LOWER BEARING GROMMET FORK FIG. 14: Route the front brake in the fork. „ FIG. 16: Install the fork. „ • Install a grommet at the entry port on the fork leg. •...
  • Page 10 80mm NYLON TUBE FRONT BRAKE HOUSING 80mm 30-50mm REAR BRAKE HOUSING FRONT BRAKE HOUSING 80mm HEAT SHRINK TUBING Di2 WIRE 80mm L x 8mm ID NYLON TUBE REAR BRAKE HOUSING FIG. 18A (Shimano Di2): Prepare brake and wire system above stem. FIG.

  • Page 11: Cockpit Assembly

    COCKPIT ASSEMBLY Choose the desired stack height, and which stack parts are needed to BOLT „ reach the desired height (see tables on page 12). SHIMANO OR SRAM WIRE EXTENSION CONICAL SOCKET WASHER SHIMANO OR BOLT SRAM WIRE 6° OR 10° SHIM CONICAL WASHER BRIDGE...
  • Page 12 MINIMUM INSERTION M4 x 6.5mm BOLT EXTENSIONS SRAM BLIP BOX WIRES GOING TO BASEBAR AND EXTENSION SHIFTERS FIG. 24 (SRAM AXS): Route the basebar and extension wires: FIG. 26: Install the extensions. „ „ • Route the basebar wires individually to each lever. •...
  • Page 13 55mm 67mm Bolt length is measured from end to end, including the bolt head. For example, a 67mm bolt will measure 67mm in total length, and have 55mm of thread length. 5mm SPACER 10 DEGREE SHIM STEM NUTS 10mm SPACER 6 DEGREE SHIM STEM BOLTS 20mm SPACER...

Table of Contents