Setting The Hdmi ® Audio Mode; Channel Memory - Toshiba 40SL412U Owner's Manual

3無
Press p or q to select a channel position to be
skipped and press
box. To remove the
To add a channel to the channel memory:
Highlight the checked box next to the channel number
you want to add, and then press
To block channels in the channel memory:
You can block specific channels. You will not be able to
tune blocked channels unless you unlock them.
( Page 42 Locking channels)
To manually add digital subchannels on a
physical channel:
Use the Channel Numbers and the Dash (
the remote control to enter the channel number (for
example, 56–1).
If the channel is found, the number will be added to
the list and the box will be unchecked.
If the channel is not found, a message will appear.
Note: Skipped channels cannot be selected with
or ; however, they can still be accessed
using the number keys on the remote control.
To remove encrypted channels from the

channel memory:

If an encrypted channel is accidentally added to the
channel list by programming channels, you can remove
the unwanted encrypted (non-viewable) channel while
you are channel surfing. When you tune to an encrypted
channel, the following message will appear.
Digital Channel Is Encrypted - Press 1 on remote to remove channel
Press while the message is on the screen to remove
the unnecessary channel from the channel list.
Chapter 5: Setting up your TV
. A will appear in the
, press again.
to remove the tick.
) on
Setting the HDMI
To set the HDMI audio mode:
1無
and open the Sound menu.
Press
2無
Highlight Audio Setup and press
3無
Press p or q to select HDMI 1 Audio and
then press t or u to select the HDMI 1 audio
mode (Auto, Digital, or Analog). (Auto is the
recommended mode.) See "Connecting an HDMI
or DVI device to the HDMI input" ( page 17).
Mode Description
When viewing the HDMI 1 input, if
digital audio from the HDMI input is
Auto available, it will be output. If not, the
TV will automatically detect and output
analog audio from the PC Audio input.
When viewing the HDMI 1 input,
Digital digital audio from the HDMI input will
be output.
When viewing the HDMI 1 input,
Analog analog audio from the PC Audio input
will be output.
4無
To save your settings, highlight Done and press
.
Note: Because the PC and HDMI-1 inputs
share the same set of analog audio inputs, the
PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to "No,"
the HDMI 1 Audio setting changes to "Auto."
If PC Audio is set to "Yes," the HDMI 1 Audio
setting is set to "Digital" and is grayed out in
the menu. (Also see item 3 on page 13 and
"Setting the PC Audio" on page 44.)
audio mode
®
.
27