Specific Operation Warnings - Roughneck 75359 Owner's Manual

•
Secure the work with clamps or a vise instead of your hand when practical. This safety
precaution allows for proper tool operation using both hands.
•
Do not force the grease gun. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work and use the correct product for the job.
•
Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate
the product with a damaged part.
•
Store the product when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
•
Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure
than the tool itself.
•
Keep guards in place and in working order. Never operate the product without the guards in
place.
•
Do not leave the tool running unattended.
•
To prevent serious injury or property damage, read and understand owner's manual before
operating.
•
Always wear the proper protective equipment, including ANSI Z87.1 compliant eye protection.
•
High Pressure Fluid Hazard. Do not use a hose pressure rating that is less than the grease
gun.
•
Do not exceed the max pressure of 10000 PSI.
•
Grease is delivered at high pressure. DO NOT point the grease outlet at yourself or others.
•
When not in use, disconnect from air supply and store in a safe, dry, and childproof location.
⚠CAUTION
GREASE GUN USE AND CARE

Specific Operation Warnings

⚠WARNING
Page 6 of 16