Advanced playback
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
DVD
Selecting the sound enhancement
VCD
CD
1
Press E.A.M.
E.A.M.
The sound enhancement menu
appears.
2
Select the sound enhancement by
pressing E.A.M. or / .
Each time you press the button, the sound
enhancement changes.
Normal:
Normal sound.
3D*:
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue*:
To control dynamic range to make
dialogue more intelligible.
• To use this enhancement on sounds
output from the BITSTREAM/PCM
jack, be sure to set "Audio Out
Select" to "PCM."
* Effective only during playback of
Dolby Digital recorded discs.
40
To exit the audio enhancement selection
Press ENTER.
Notes
• Actual effects to sounds may vary depending on the speaker
system. Make selection according to your preference.
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
equipped with Dolby Surround Pro Logic, select "Normal".
Otherwise, Dolby Surround Pro Logic may function
differently than usual.
• Selecting "Dialogue" disables "Dynamic Range Control"
function
Manufactured under license from QSound Labs, Inc. U.S. patent
Nos. 5,105,462, 5,208,860 and 5,440,638 and various foreign
counterpart. Copyright QSound Labs, Inc. 1998-2002. QXpander
is a trademark of QSound Labs, Inc. All rights reserved.
50
Alternatively leave the DVD video
player unattended for about 5
ENTER
seconds after having made a
selection.
.
50
2
ENTER
1, 2
TM