Connecting To An Amplifier Equipped With A Dolby Digital Decoder; Connecting To An Amplifier Equipped With Dolby Surround Pro Logic - Toshiba SD-K510 Owner's Manual

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the
latest movies, and is now available to reproduce this realistic effect in the home.
You can enjoy motion picture and live concert DVD video discs with this dynamic
realistic sound by connecting the DVD video player to a 6 channel amplifier
equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a
Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic
from the same DVD movies that provide full 5.1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround mark.
Amplifier equipped with a
Dolby Digital decoder

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by
connecting an amplifier and speaker system (right and left front speakers, a
center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an
amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's
owner's manual and set the amplifier so you can enjoy Dolby Surround Pro
Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Amplifier equipped with
*
Dolby Surround Pro Logic
To COAXIAL type
digital audio input
To BITSTREAM/
PCM AUDIO OUT
75 Ω coaxial cable
To audio input
To ANALOG
AUDIO OUT
Audio cable
Manufactured under license from Dolby
Laboratories. "Dolby" "Pro Logic" and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
unpublished works. ©1992-1997 Dolby
Laboratories. All rights reserved.
• Use DVD video discs encoded via
the Dolby Digital recording
system.
• Make the following setting.
On-screen display
VIDEO Y P B P R
VIDEO OUT
AUDIO OUT
COAXIAL
R L
S
ANALOG BITSTREAM/PCM
DIGITAL "Audio Out Select"
Recording system
• Make the following setting.
On-screen display
"Audio Out Select"
Be sure to set "Audio Out Select"
to "Analog 2ch" when you enjoy
sounds of Dolby Surround Pro
Logic using this connection.
* Connect one or two rear speakers.
The output sound from the rear speakers
will be monaural even if you connect two
rear speakers.
VIDEO Y P B P R
VIDEO OUT
AUDIO OUT
R L COAXIAL
S
ANALOG BITSTREAM/PCM
DIGITAL
Select: Page
48
"Bitstream"
50
D 43
Select: Page
48
"Analog 2ch"
50
21