Indicator Lights - Yamaha Majesty YP250 Owner's Manual

Hide thumbs Also See for Majesty YP250:
Table of Contents

Advertisement

1
2
3
1. Oil change indicator light "
7
2. High beam indicator light "&"
3. Left turn signal indicator light "4"
4. Right turn signal indicator light "6"

Indicator lights

Oil change indicator light "
This indicator light comes on at the
initial 1,000 km and every 3,000 km
thereafter to indicate that the engine
oil should be changed.
After changing the engine oil, reset
the oil change indicator light.(See
page 6-17 for the resetting proce-
dure.)
INSTRUMENT AND CONTROL FUNCTIONS
The electrical circuit of the indicator
light can be checked according to the
4
following procedure.
1. Set the engine stop switch to "#"
and turn the key to "ON".
2. Check that the indicator comes
on for a few seconds and then
goes off.
If the indicator light does not
"
come on, have a Yamaha dealer
check the electrical circuit.
EAU00056
NOTE:
The oil change indicator light may
flash when the engine is revved with
EAU03734
the scooter on the centerstand, but
"
7
this does not indicate a malfunction.
High beam indicator light "&"
This indicator light comes on when
the high beam of the headlight is
switched on.
Turn signal indicator lights
"4"/"6"
The corresponding indicator light
flashes when the turn signal switch is
pushed to the left or right.
3-2
EAU00063
1
2
EAU03299
3
4
5
6
7
8
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents