Functions Of Parts - Zoom AMS-24 Quicktour

Functions of parts

■ Top
① POWER indicator
This lights when the power is on. This
blinks when the remaining battery
charge is low.
② Input type switch
Set this according to the equipment con-
nected to INPUT 1.
③ Stereo link switch
Turn this on when inputting a stereo sig-
nal through Inputs 1 and 2. Input 1 will
become the left signal and Input 2 will
become the right signal. When the Ste-
reo Link switch is on, the input gain for
both Inputs 1 and 2 is controlled by Gain
knob 1.
④ Gain knobs
Use these to adjust input signal levels.
⑤ Level indicators
These indicators show signal levels after
gain knob adjustments.
The indicator colors change according to
the signal levels.
Lit green: Input signal is present.
Lit red: Input signal is clipping.
■ Bottom
⑥ MUSIC/STREAMING switch
This switches between MUSIC and
STREAMING modes. Set it to MUSIC
when using the AMS-24 to make music
with a DAW, for example. Set it to
STREAMING when using it to stream on
the web, for example.
⑦ OUTPUT A knob
Use this to adjust the volumes of the sig-
nals output from the OUTPUT A standard
1/4-inch phone jacks and the headphone
output jack A.
⑧ OUTPUT B knob
Use this to adjust the volume of the sig-
nals output from the headphone output
jack B.
⑨ Battery cover
Slide this to remove it when loading
batteries.
5