Front Module - THOMSON STUDIO CAMERA LDK 20(S) Technical Manual

Front module

1
1
To remove the front module proceed as follows:
a. On the frontside of the camera remove the four
screws securing the front assembly.
1
b. Remove the front assembly from the camera.
c. Remove the Front Interconnection Board by
unscrewing two screws from the backside of the

front module.

d. Loosen the four screws
module.
e. Slide the front module straight out of the front
assembly.
Replacements
2
2
securing the front
2
Technical Manual LDK 20(S) - Studio Camera
1
2
2
1
3-3