Energy Consumption Display - Bosch NIT8660SUC User Manual

en-us Operation
Display Function
Panel lock
1
– Manual
– Automatic
– Function deactivated
Signal tones
– Confirmation signal and error signal are
off. The main switch signal remains on.
– Only error signal is on.
– Only confirmation signal is on.
– Confirmation signal and error signal are
on. 1
Display energy consumption
– Deactivated.
– Activated.
Duration of timer end signal
– 10 seconds
– 30 seconds
– 1 minute
⁠ ⁠ Power management function. Limiting the to-
tal power of the cooktop. The available set-
tings depend on the maximum power of the
cooktop.
– Deactivated
– 1.000 W minimum power
– 1.500 W
...
– 3.000 W recommended for 13 A
. – 3.500 W recommended for 16 A
– 4.000 W
. – 4.500 W recommended for 20 A
...
or . – Maximum power of the cooktop
Time for setting a cooking zone after selec-
tion
– Unlimited: The last selected cooking zone
remains selected. You can adjust the settings
without having to select it again.
– Limited: You can adjust the settings for
the selected cooking zone within 10 seconds.
After 10 seconds you have to select the
cooking zone again.
Results for suitability test for cookware
– Not suitable.
– Not ideal.
–Suitable.
Restore factory settings
1
– Off
– Restore appliance to factory settings
1 Factory setting (may vary according to model)
2 The cooktop's maximum power output is shown on the
rating plate
Changing the basic settings
Requirement: The cooktop is turned off.
Turn on the cooktop.
1.
Within the next 10 seconds, press kitchen timer for
2.
about 4 seconds.
The first four displays provide the product information.
To call up the individual displays, touch the control
panel.
18
1
1
1 , 2
Product information
Customer Support index (CI)
Production number
Production number 1
Production number 2
Press kitchen timer to access the basic settings.
3.
a In the left display
a In the timer display
Press kitchen timer repeatedly until the desired setting
4.
lights up in the left display.
Set the desired option in the settings area.
5.
Press kitchen timer for about 4 seconds.
6.
2
a The setting is saved.
Tip: Press On/Off to leave the basic settings and turn off
the cooktop.
6.14 Energy consumption display
This function indicates the total amount of energy con-
sumed between turning the cooktop on and turning it off
again.
Once cooktop is turned off, the energy consumption is dis-
played in kWh for 10 seconds, e.g. 1.08 kWh. The accu-
racy of the display depends on various factors such as the
voltage quality of the power supply.
You can activate or deactivate this function in the basic
settings menu. → Page 17
Display
⁠ .
and flash alternately.
lights up.