Camera and Gallery
Take Photos
Take Photos
1
Open Camera.
2
You can then:
Focus: Touch the location you want to focus on.
•
To adjust focus and metering separately, touch and hold the viewfinder and drag the
respective frame or ring to the desired location.
Adjust brightness: Touch the viewfinder. When the
•
focus frame, drag it up or down.
Zoom in or out: On the viewfinder, pinch in or out, or drag the zoom slider.
•
Select a camera mode: Swipe up, down, left, or right across the camera mode options.
•
Turn the flash on or off: Touch
•
(Always on).
If you select
environment, a flash icon will appear in the viewfinder and the flash will be
automatically turned on when you take a photo.
These features may not be available in some camera modes.
3
Touch the shutter button to take a photo.
Use the Floating Shutter to Take Photos
You can enable the floating shutter to display it in the camera viewfinder, and drag it
anywhere you like to take photos quickly.
1
Go to Camera >
2
The floating shutter will then be displayed in the viewfinder. You can drag it anywhere you
like.
3
Touch the floating shutter to take a photo.
Take Burst Photos
Use Burst mode to take a sequence of photos in quick succession so you can choose the best
one.
1
Open Camera, select Photo mode, and make sure the rear camera is in use.
and select
(Auto) and the camera detects that you are in a dimly lit
and enable Floating shutter.
symbol appears next to the
(Auto),
(On),
(Off), or
19