Servicing; Product Specifications - Tru-Test 15 J R User Manual

Servicing

This energizer contains no user serviceable parts. It must be returned to a Tru-Test-appointed service agent for repair. If the supply
cord is damaged it must only be replaced by a Tru-Test-appointed service agent, as a special cord is required.
This energizer uses Double Insulation, where two systems of insulation are provided instead of grounding. No equipment grounding
means is provided in the supply cord of a double-insulated energizer, nor should a means for equipment grounding be added to
the energizer. Servicing a double-insulated energizer requires extreme care and knowledge of the system and should only be done
by qualified service personnel. Replacement parts for a double-insulated energizer must be identical to the parts they replace. A
double-insulated energizer is marked with the words DOUBLE INSULATION or DOUBLE INSULATED and/or the symbol below.

Product specifications

Power Consumption
Maximum Output Voltage
Maximum Output Energy
Stored Energy
Europe only
Power Consumption
Maximum Output Voltage
Maximum Output Energy
Stored Energy
10
15 J R
20 W
up to 8900 V open circuit
up to 7900 V at 500 Ω
up to 14.6 J at 75 Ω
up to 5.8 J at 500 Ω
20 J
15 J RE
20 W
up to 7300 V open circuit
up to 6400 V at 500 Ω
up to 14.6 J at 75 Ω
up to 4.5 J at 500 Ω
20 J
20 J R
33 W
up to 9500 V open circuit
up to 8900 V at 500 Ω
up to 22.0 J at 50 Ω
up to 7.3 J at 500 Ω
34 J
20 J RE
33 W
up to 7300 V open circuit
up to 6400 V at 500 Ω
up to 22.0 J at 50 Ω
up to 4.8 J at 500 Ω
34 J
36 J R and 36 J RS
52 W
up to 9400 V open circuit
up to 8400 V at 500 Ω
up to 36.5 J at 50 Ω
up to 6.7 J at 500 Ω
54 J
36 J RE and 36 J RSE
52 W
up to 7600 V open circuit
up to 6600 V at 500 Ω
up to 36.5 J at 50 Ω
up to 4.9 J at 500 Ω
54 J