Advertisement
Disconnect "Power In"
3. Crimp the connectors included with this kit on to the LED XFMR wires
Crimp the male connector on to the BLACK wire and the female connector
IMPORTANT
on to the WHITE wire
4. Install the replacement power supply into the location of the previous power supply. The power supply
should be oriented so the label is facing upward. Secure the power supply in place using the included
wire tie and Velcro strips.
POLARITY DOES MATTER. The BLACK LED wire to the RED power supply wire. The
WHITE LED wire to the BLACK power supply wire.
Connect LED XFMR wires
(BLACK to RED, WHITE to BLACK)
Connect to
"Power In"
Restore the fireplace to its correct configuration.
5.
Page 2 of 3
DaVinci LED Power Supply
Second Generation Power Supply
Disconnect
LED XFMR
& discard
17602224 - 9/13/2021
sku# 250-05849
IMPORTANT
© Travis Industries, Inc.
Advertisement
