Maintenance - Husqvarna 525RJX Operator's Manual

4. Use 80 % throttle when you cut grass near objects.
To use the grass clearing technique
• Use this procedure to fully remove the grass.
• Keep the trimmer head near the ground at an angle.
Let the trimmer line hit the ground around the object
where you remove the grass.
CAUTION:
increases the wear on the trimmer line.
It is necessary to increase the length of
the trimmer line more frequently when
you clear grass against stones, concrete
and metal fences than against trees and
fences made of wood.
• Decrease the engine speed to decrease the wear on
the trimmer line and the trimmer head.
To cut the grass
1. Make sure that the trimmer line is parallel to the
ground when you cut the grass.
Maintenance schedule
WARNING:
and servicing given in this operator's
1927 - 001 - 10.06.2022
This procedure

Maintenance

Only do the maintenance
2. Do not push the trimmer head to the ground. This
can cause damage to the product.
3. Move the product from side to side when you cut
grass. Use full speed.
To sweep the grass
The airflow from the rotating trimmer line can be used to
remove cut grass from an area.
1. Hold the trimmer head and the trimmer line parallel
to the ground and above the ground.
2. Apply full throttle.
3. Move the trimmer head from side to side and sweep
the grass.
WARNING:
cover each time you assemble new trimmer
line to prevent unbalance and vibrations in
the handles. Also do a check of the other
parts of the trimmer head and clean it if
necessary.
manual. For maintenance or servicing that
is not given in this operator's manual, speak
to your servicing dealer.
Clean the trimmer head
17