Conversion Table - Hyundai HX235 LCR T3 Service Manual

3. CONVERSION TABLE

Method of using the Conversion Table
The Conversion Table in this section is provided to enable simple conversion of figures. For details of
the method of using the Conversion Table, see the example given below.
Example
1. Method of using the Conversion Table to convert from millimeters to inches
Convert 55mm into inches.
Locate the number 50 in the vertical column at the left side, take this as ⓐ, then draw a
(1)
horizontal line from ⓐ.
Locate the number 5 in the row across the top, take this as ⓑ, then draw a perpendicular line
(2)
down from ⓑ.
Take the point where the two lines cross as ⓒ. This point ⓒ gives the value when converting
(3)
from millimeters to inches. Therefore, 55 mm = 2.165 inches.
2. Convert 550 mm into inches.
The number 550 does not appear in the table, so divide by 10 (Move the decimal point one place
(1)
to the left) to convert it to 55 mm.
Carry out the same procedure as above to convert 55 mm to 2.165 inches.
(2)
The original value (550 mm) was divided by 10, so multiply 2.165 inches by 10 (Move the decimal
(3)
point one place to the right) to return to the original value.
This gives 550 mm = 21.65 inches.
Millimeters to inches
0 1
0 0.039
10 0.394 0.433
20 0.787 0.827
30 1.181 1.220
40 1.575 1.614
50 1.969 2.008
ⓐ
60 2.362 2.402
70 2.756 2.795
80 3.150 3.189
90 3.543 3.583
2 3 4
0.079 0.118 0.157
0.472 0.512 0.551
0.866 0.906 0.945
1.260 1.299 1.339
1.654 1.693 1.732
2.047 2.087 2.126
2.441 2.480 2.520
2.835 2.874 2.913
3.228 3.268 3.307
3.622 3.661 3.701
0-3
Find manuals at https://best-manuals.com
ⓑ
5 6 7
0.197 0.236 0.276
0.591 0.630 0.669
0.984 1.024 1.063
1.378 1.417 1.457
1.772 1.811 1.850
ⓒ
2.165 2.205 2.244
2.559 2.598 2.638
2.953 2.992 3.032
3.346 3.386 3.425
3.740 3.780 3.819
1 mm = 0.03937 in
8 9
0.315 0.354
0.709 0.748
1.102 1.142
1.496 1.536
1.890 1.929
2.283 2.323
2.677 2.717
3.071 3.110
3.465 3.504
3.858 3.898