Table of Contents
Advertisement
Section 6: SG-DVL2A Programmable Features
6.1 Line Card Menu Mode
When the unit is not on line, pressing the [ACK/FUNCTION]
button will display the first Function Menu:
Dsp PRINTER alm
ACK:menu SEL:sel
Press the [ACK] button to scroll through the menu items.
Press the [SELECT] button to select the function displayed
on the LCD screen. When a function is selected, press
[ACK] and [SELECT] together to exit from the Menu Mode.
The DVL2A will automatically exit from the Menu Mode if no
keys are pressed for 30 seconds.
The following functions are available in the Line Card Menu
Mode:
• Display Printer Alarm Buffer
Display Computer Buffer
Display Call-ID Buffer
• Display Line Card Configuration
• Display Program Version
• Adjust LCD Contrast
6.2 Display Printer Alarm Buffer
Dsp PRINTER alm
ACK:menu SEL:sel
With this message displayed, press the [SELECT] button;
the most recent alarm message will be displayed.
Press the [SELECT] button to scroll backwards through alarm
messages; press the [ACK] button to scroll forward through
alarm messages.
Press the [ACK] button to display the alarm message:
L01-1234551555557
• "L01" represents Line Card 01
• "1234" is the Account Code
• In this example, a 4-8-1 communication format is used.
• "001" is the event's location in the Event Buffer.
The Event Buffer can record up to 256 alarm messages .
To print these messages, a print command may be sent
from the CPM2; refer to "System Command Mode" for
information.
Press [ACK] and [SELECT] together to return to the Standby
Mode. If no keys are pressed, the DVL2A will automatically
return to the Standby Mode after 30 seconds.
6.3 Display Caller ID Alarm Buffer
This menu will display the Call Arrival block for each message
received.
With this message displayed, press the [SELECT] button;
the most recent alarm message will be displayed.
Press the [SELECT] button to scroll backwards through the
messages; press the [ACK] button to scroll forward through
alarm messages.
10
6.4 Display Computer Alarm Buffer
6.5 Display System Configuration Buffer
6.6 Display Program Version
001
6.7 Adjust LCD Contrast
firealarmresources.com
Press the [ACK] button to display the Call-ID message:
L01-123456789
• "L01" represents Line Card 01
• In this example, The Pad-ID number would be 123456789
• "001" is the event's location in the Event Buffer
• Note that "No Call No." will be displayed if Option 05 is
disabled
This menu will display the data that was sent to the computer
Dsp CONFIG syst.
ACK:menu SEL:sel
With this message displayed, press the [SELECT] button;
the current Line Card Configuration will be displayed. Press
the [ACK] button to scroll forward through the configuration
displays, or press the [SELECT] button to scroll backwards.
Shown below is a typical configuration display; refer to "DVL2A
Programmable Features" for Line Card configuration
information.
L01 #00
RS-232C CD: 000
Press [ACK] and [SELECT] together to return to the Standby
Mode.
Dsp PROGRAM vers
ACK:menu SEL:sel
With this message displayed, press the [SELECT] button;
the date and the software version number will be displayed
as shown below:
SG-DVL2A CSL-X28
OCT 06,97 V1.00
Press [ACK] and [SELECT] together to return to the Standby
Mode.
Adjust CONTRAST
ACK:menu SEL:sel
With this message displayed, press the [SELECT] button to
adjust the LCD screen's contrast. When the [SELECT] button
is pressed, this message will be displayed:
Adjust CONTRAST
Press the [ACK] button to increase the contrast; press the
[SELECT] button to reduce the contrast. The display will
indicate the contrast level on the second line.
Press [ACK] and [SELECT] together to return to the
Standby Mode.
001
00
Advertisement
Table of Contents
