DSC MAXSYS RF4164-433 Instruction Manual
  1. Manuals
  2. Brands
  3. DSC Manuals
  4. Security Sensors
  5. MAXSYS RF4164-433
  6. Instruction manual

DSC MAXSYS RF4164-433 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RF4164-433 v4.0 • Installation Manual
WARNING: This manual contains information on limitations regarding product
use and function and information on the limitations as to liability of the
manufacturer. The entire manual should be carefully read.
This RF4164-433 V4.0 receiver version is currently
supported by all PC4020 DLS-3 downloading files.
firealarmresources.com
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAXSYS RF4164-433 and is the answer not in the manual?

Questions and answers

Related Manuals for DSC MAXSYS RF4164-433

Summary of Contents for DSC MAXSYS RF4164-433

  • Page 1 ® RF4164-433 v4.0 • Installation Manual WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. This RF4164-433 V4.0 receiver version is currently supported by all PC4020 DLS-3 downloading files.
  • Page 2 Washington, D.C. 20402, Stock # 004-000-00345-4. The complete R&TTE Declaration of Conformity can be found at http://www.dsc.com/listings_index.aspx. IMPORTANT: This equipment shall be installed by Service Persons only (service person is defined as a person having the appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed in performing a task and of measures to minimize the risks to that person or other persons).

  • Page 3: Table Of Contents

    Table of Contents Introduction 1.1 Before You Begin ................1 1.2 How to Use This Manual ..............1 1.3 RF4164-433 Specifications ............... 2 1.4 Wireless Devices ................2 Getting Started 2.1 Unpack the RF4164-433 Receiver ............. 3 2.2 Find a Mounting Location for the RF4164-433 ........ 3 2.3 Connecting the RF4164-433 .............
  • Page 4 WARNING Please Read Carefully Note Installers tioned. Smoke may not be able to reach the smoke detectors, such This warning contains vital information. As the only individual in as when the fire is in a chimney, walls or roofs, or on the other side contact with system users, it is your responsibility to bring each item of closed doors.

  • Page 5: Introduction

    3. Install and enroll all hardwired zone expander modules (PC4108 or PC4116) (see PC4020 Installation Manual , Section 4: Module Enrollment). You can program the RF4164-433 from a PC4020 system LCD keypad or using DSC downloading software (DLS-3 or higher). See the PC4020 Installation Manual , Section 3 “How to Program”.

  • Page 6: Rf4164-433 Specifications

    Enter the reference number found in the Programming Worksheets for the section you wish to program, then press the [✱] key. The display will immediately go to the programming item you have selected. 1.3 RF4164-433 Specifications • Up to eight RF4164-433 receivers can be installed per PC4020 v3.2 or higher system.

  • Page 7: Getting Started

    Getting Started This section describes how to set up and enroll the RF4164-433 module. 2.1 Unpack the RF4164-433 Receiver Check that the following parts are in your RF4164-433 package: • RF4164-433 PCB • RF4164-433 plastic cabinet 2.2 Find a Mounting Location for the RF4164-433 NOTE: Do not permanently mount the RF4164-433 now.

  • Page 8: Enroll & Program Wireless Devices

    NOTE: You cannot have more than 128 zones on the PC4020. If the total number of zones theoretically available on the zone expanders exceeds the maximum for the panel, you will not be able to use the extra zones. A description of how to enroll keypads and modules is in your PC4020 Installation Manual.

  • Page 9: A Note About Electronic Serial Numbers (Esn)

    Enroll & Program Wireless Devices This section describes how to enroll and program wireless devices. For more information, read the instruction sheet included with each device. 3.1 A Note about Electronic Serial Numbers (ESN) In order to reduce the occurrence of wireless devices with the same serial number, 6- digit serial numbers are now printed on the back of each wireless device.

  • Page 10: Enrolling And Programming Wireless Keys

    I N S T A L L I N G W I R E L E S S D E V I C E S 3.3 Enrolling and Programming Wireless Keys For wireless keys to work on the system, you need to enroll them and then program the function buttons.
  • Page 11 I N S T A L L I N G W I R E L E S S D E V I C E S 4. Enter the 2-digit number of the function you want to select, or scroll to the function you want to assign to that button and press [✱].

  • Page 12: Testing & Mounting Devices

    Testing & Mounting Devices You should test each device you have enrolled to ensure good signal strength between the devices and the RF4164-433 receiver. Follow the instructions in this section to test wireless devices which use zones, wireless keys and handheld keypads. If several wireless devices produce BAD test results, you may need to move the RF4164-433 to a better location (see section 2.3 for tips on finding a location for the RF4164-433 module).

  • Page 13: Test Wireless Key Reception

    T E S T I N G & M O U N T I N G D E V I C E S For PC4020 v3.2 system, the system keypad will also display the number of RF4164- 433 receivers that reported the highest level result (e.g., “Placement Good by 2 Receivers”).

  • Page 14: Deleting & Replacing Devices

    Deleting & Replacing Devices If a device is not working, or you need to change the setup of the system, you may need to replace or delete wireless devices. Follow the appropriate procedure in this section. 5.1 Replacing Devices 1. At a system LCD keypad, enter [✱][8][Installer’s code]. 2.

  • Page 15: Deleting Device Serial Numbers

    D E L E T I N G & R E P L A C I N G D E V I C E S Make sure you update the programming for each device you enroll. 5.3 Deleting Device Serial Numbers Entering this programming section will erase the serial numbers of all the wireless devices.

  • Page 16: Additional Programming Notes

    Additional Programming Notes 6.1 Device Fail Time When supervision of a wireless detector is turned ON, the panel will show a trouble if a wireless zone stops working or is removed from the system. When supervision is turned OFF, the panel will not show a trouble. NOTE: Wireless keys are NOT supervised.
  • Page 17 A D D I T I O N A L P R O G R A M M I N G N O T E S The following trouble conditions apply to the RF4164-433 receiver. For a description of all troubles, please see Section 16 “Diagnostics and Troubleshooting ” in the PC4020 Installation Manual.

  • Page 18: Troubleshooting

    Troubleshooting 1. When I enter [0013] RF4164-433 options, the keypad gives me a long beep. You cannot enter ESNs unless the RF4164-433 wireless receiver is enrolled. See section 2 for instructions on enrolling the RF4164-433 module. 2. I have entered the ESN for the device but when I violate the device, the zone does not show open on the keypad.

  • Page 19: Programming Worksheets

    Programming Worksheets [001300] Enroll Wireless Detector (see section 3.2) • Default = 000000 • 6-digit entry is required; for 5-digit serial numbers, enter [0], then the number (See section 3.1 “A Note About Electronic Serial Numbers”.) Serial Number Zone Serial Number Zone l _ _ _ _ _ l _ _ _ _ _ l _ _ _ _ _ l _ _ _ _ _ l _ _ _ _ _ l _ _ _ _ _ l l _ _ _ _ _ l _ _ _ _ _ l _ _ _ _ _ l...
  • Page 20 WLS9X9 Wireless Key Options (see section 3.3) [001300] Enroll Device Default = 000000 Wireless Serial Wireless Serial Key No. Key No. l _ ____ l _ ____ l _ ____ l _ ____ l _ ____ l _ ____ l l _ ____ l _ ____ l _ ____ l _ ____ l _ ____ l _ ____ l l _ ____ l _ ____ l _ ____ l _ ____ l _ ____ l _ ____ l l _ ____ l _ ____ l _ ____ l _ ____ l _ ____ l _ ____ l...
  • Page 21 [001306] Device Supervision Default = ON NOTE: Wireless Keys are NOT supervised. Zone Supervision Zone Supervision Zone Supervision ON/OFF ON/OFF ON/OFF l _____ l _____ l _____ l l _ _______ l l _____ l _____ l _____ l l _ _______ l l _____ l _____ l _____ l l _ _______ l l _____ l _____ l _____ l...
  • Page 22 Index Frequency 4 Reference numbers 3 device 7 Remove wireless key 8 devices 12 Low battery Replace devices 15 devices 12 Batteries replacing 15 Motion detector type 4 Serial numbers 7 test 10 Buttons Slot number Mount wireless key 8 programming 8 devices 11 Supervision 14...
  • Page 23 EULA grants You no rights to use such content. All rights not expressly granted under this EULA are damages. If the laws of such a jurisdiction apply to any claim by or against DSC, the limitations and reserved by DSC and its suppliers.
  • Page 24 SOFTWARE PRODUCT), the accompanying printed materials, and division of Tyco Safety Products Canada Ltd. (“DSC”), the any copies of the SOFTWARE PRODUCT, are owned by DSC or its suppliers. You may not copy the printed materials accompanying the SOFTWARE manufacturer of the integrated security systems and the developer of the softwar e a nd any related products or components (“HARDWARE”)

Table of Contents