Advertisement
12. If a backpack hook was ordere, determine the
location in which you would like to place the optional
backpack hook ⑥. Remove the joint connector bolt
from the leg plate ③ in the determined location.
Align tab of the backpack hook on top of the leg
plate.
Using a 4mm Allen wrench or 4mm hex bit,
secure backpack hook to the leg plate ③ with a
1/4"-20x19mm joint connector bolt.
②
③
wibenchmfg.com
ASSEMBLY
⑥
①
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
4
Advertisement
