Husqvarna BMS 150 Operator's Manual page 10

• Select a blade of smaller dimension in these
situations:
a) At the start of an operation.
b) Operation on materials with strong adhesive.
c) Operation on hard materials.
• Select a blade of wider dimension in these
situations:
a) Operation on soft materials.
• Select a thicker heavy duty blade for hard materials.
A thicker blade also has a longer life.
• Install the blade with the bevel up for removal of
materials from concrete floors.
• Install the blade with the bevel down for removal of
materials from wood floors and soft subfloors.
To connect the product to a power
source
WARNING:
area is safe before you connect the product
to a power source. Refer to
safety on page 6 .
1. Pull out the electrical cable from the retractable
cable reel.
2. Connect the electrical cable to a mains socket.
10
Make sure that the work
Work area
3. Put 2 weights (A) on the cable stop (B). Make sure
that the electrical cable (C) is not in full tension
between the weights and the mains socket.
C
A
To start the product
WARNING:
area is safe before you start the product.
Work area safety on page 6 .
Refer to
1. Connect the product to a mains socket. Refer to
connect the product to a power source on page 10 .
2. Sit on the seat, put your feet on the footrest plate
and fasten the seat belt.
3. Pull the emergency stop button out. Refer to
overview on page 3 .
4. Push the ON switch. Refer to
page 3 .
To operate the product
1. Operate the movement controls to move the product.
Product overview on page 3 .
Refer to
a) To move the product forward, push the
movement controls forward.
b) To move the product rearward, pull the
movement controls rearward.
c) To turn to the right, push the left movement
control forward.
d) To turn to the left, push the right movement
control forward.
e) To turn clockwise around the product axis, push
the left movement control forward and pull the
right movement control rearward.
f) To turn counterclockwise around the product
axis, push the right movement control forward
and pull the left movement control rearward.
2. Adjust the speed with the movement controls.
a) Push or pull the movement controls a small
distance for slow speed.
b) Push or pull the movement controls a long
distance for high speed.
A
B
Make sure that the work
To
Product
Product overview on
1817 - 002 - 13.04.2022