Jan. 2007
Exploded View
fig.bunkai.eps_65
Disassembly Procedure—Removing the Main Board
1.
Remove the bottom cover (1). (In the Exploded View, bottom cover screw m)
2.
Remove side panels L (22) and R(23). (In the Exploded View, side panel screws a and f)
3.
Remove the rear panel's (24) jack nuts and washers, and the PHONO, DIGITAL A, B, and USB screws. (In the Exploded View, rear panel a, m, o, and p)
4.
Remove screw b that fastens the main board (12).
5.
Disconnect all wiring that is connected to the main board.
6.
Lift up the rear panel and remove the main board.
8
MV-8800