Safety Information - Pentair HYPRO CLEANLOAD NEXUS Installation And Operation Manual

1. SAFETY INFORMATION

READ THESE INSTRUCTIONS AND THEN KEEP THEM FOR
REFERENCE: This manual contains important instructions that
should be followed during installation, operation and routine
maintenance of Cleanload Nexus.
SAFETY SYMBOLS
This is the safety alert symbol. When you see this symbol do
not ignore it! Look for one of the following signal words and be alert
to the potential for personal injury:
Warns about hazards that could cause serious
DANGER
!
personal injury, death or major property damage.
Warns about hazards that could cause serious
WARNING
!
personal injury, death or major property damage.
Warns about hazards that could cause serious
CAUTION
!
personal injury or property damage.
The word NOTE indicates special instructions that are important
but not related specifically to hazards.
GENERAL SAFETY
Carefully read and follow all safety instructions in this manual
and on the Cleanload Nexus itself. Failure to comply with the
safety/operating instructions could result in personal injury and/
or property damage and could lead to the loss of any claims for
damages.
Ensure that you understand the Cleanload Nexus applications,
limitations, and potential hazards. Keep safety labels fixed to
Cleanload Nexus and in good condition. Replace any missing or
damaged labels.
The mounting and connections of Cleanload
WARNING
!
Nexus must be done by professionals who are trained in repair
and maintenance of the sprayer.
∙
For mounting on the sprayer only use hoses
WARNING
!
and fittings that meet the recommended specifications of the
sprayer manufacturer.
∙ Only use pipe, hose, and hose fittings that have not been used
before and meet the stated maximum pressure ratings of the
Cleanload Nexus. Check all hoses for weakness or signs of wear
before each use.
∙
Regulations and recommendations for personal
WARNING
!
protective equipment (PPE) must be complied with.
4
When operating
Cleanload Nexus use
the Personal Protective
Equipment (PPE) that is
recommended on the
agrochemical label.
If no specific PPE
is required by the
agrochemical label wear
gloves, protective glasses
and a chemical resistant
apron or overall when
operating, maintaining
or servicing Cleanload
Nexus.
CLEANLOAD NEXUS
Before using Cleanload Nexus:
∙ Ensure that the Cleanload Nexus is mounted securely on the
sprayer or other mounting location.
∙ Always comply with regulations when choosing a suitable site for
filling the sprayer with chemical.
∙
DANGER Ensure that all hoses are securely connected,
!
that the sprayer' s suction is operating and that the Umbrella
Valves are in place
∙ Only use containers that are fitted with an easyconnect cap. Do
not remove and refit the cap to any other container except a
container of water or cleaning agent that is used for cleaning the
Cleanload Nexus as directed in this manual.
∙ Do not operate Cleanload Nexus at pressures outside of the
range given in this manual.
∙ Only operate Cleanload Nexus at temperatures between 0° and
60°C (32° to 140°F).
∙ Do not attempt to transport or move Cleanload Nexus with a
chemical container connected.
∙ Defective components and assemblies must be replaced
immediately. Use original spare parts for replacement only.
After using Cleanload Nexus:
∙
Always clean the Cleanload Nexus according to
CAUTION
!
the instructions.
∙ Comply with regulations on cleaning sprayers when cleaning the
Cleanload Nexus.
∙ Do not leave concentrated agrochemicals in the Cleanload Nexus
for extended periods after carrying out a transfer.
∙ Store Cleanload Nexus under protected, frost-free conditions
and inaccessible to children and animals at all times.
∙ For winter storage or if freezing conditions are anticipated, clean
the Cleanload Nexus according to instructions then additionally
pass a 50/50 mixture of water and antifreeze through.
∙ Fit the Top Cover to protect Cleanload Nexus when not in use.
∙ Check if there is leakage from any part of the Cleanload Nexus or
connecting hoses or if the handle is very difficult to rotate and
rectify before next use.
∙ Do not attempt to maintain or repair Cleanload Nexus without the
required training, tools and parts as any substitute could result in
damage and failure of the Coupler. Instructions for maintenance
and service are included in the Service and Maintenance Manual
Hazardous substances alert
CAUTION
!
1. Always drain and clean Cleanload Nexus before storage,
servicing or disassembling for any reason.
2. Always drain and clean Cleanload Nexus prior to returning to a
service agent for maintenance or repair.
3. Before attempting to carry out any maintenance or repair, make
sure that you are wearing appropriate PPE.
PNR-CN100-OIPM (10/12/21) ©2021 Pentair. All Rights.