Night scene mode
3
Press
then press
The setting is set to Night scene mode and
the camera returns to shooting mode.
The night scene mark
monitor.
4
Take the picture.
2
If the shutter speed is more than 1 second, the noise reduction function
will automatically be activated. The green and orange lamps will blink
during processing. The processing will take the same amount of time
as the exposure time.
The camera can be moved during noise reduction processing,
•
but shots cannot be taken.
The factory default setting in Night scene mode is the auto flash.
•
Selecting the red-eye reduction flash automatically changes the
setting to the fill-in flash.
Sequential shooting, AF Sequential shooting and panorama
•
shooting cannot be used in Night scene mode.
As the shutter speed is relatively slow, the use of a tripod is
•
recommended.
48
to select NIGHT SCENE,
.
appears on the
NIGHt SCENE
SELECt
GO