Olympus Camedia C-300 ZOOM Quick Start Manual

C-300 ZOOM C-300 ZOOM C-300 ZOOM C-300 ZOOM
DIGITAL CAMERA D-550 ZOOM D-550 ZOOM D-550 ZOOM D-550 ZOOM
Quick start guide
We've included this convenient Quick start guide to show you basic functions and
techniques that will help you quickly master your new camera. For more detailed
descriptions of procedures, as well as for additional information on more sophisticated
features not covered here, please refer to the printed "Basic Manual", or the primary
"Reference Manual" on the CD-ROM.
Package contents
Camera CD-ROM with Windows 98 USB driver
Strap software, Reference manual, and more.
AA (R6) alkaline batteries (4 pieces) Warranty card/Registration card (not
Video cable provided in some areas)
USB cable Safety Precautions (booklet)
Basic manual SmartMedia
Quick start guide Static-free case
Software installation guide (included in Index labels (2 pieces)
the CD-ROM package) Write-protect adhesive seals (4 pieces)
SmartMedia instructions
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
24/7 online automated help: http://support.olympusamerica.com/
Phone customer support: Tel. 1-888-553-4448 (Toll-free)
OLYMPUS OPTICAL CO. (EUROPA) GMBH.
Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany
Tel. 040-237730
Letters: Postfach 10 49 08, 20034 Hamburg, Germany
http://www.olympus.com/
Printed in Japan
1AG6P1P1353--

3 Shooting/Playback

Taking still pictures
1 1 1 1
Open the lens barrier fully.
Slide the lens barrier fully open until it clicks.
The flash pops up and the lens extends.
2 2 2 2
Position the AF target mark over the
subject in the viewfinder.
Orange lamp
AF target mark
Green lamp
3 3 3 3
Press the shutter button gently
(halfway).
The focus and exposure are locked when the green lamp
on the right of the viewfinder lights up. At this time the
sound of the focusing mechanism can be heard from inside
the camera, but no picture is being taken.
4 4 4 4
Press the shutter button all the way (fully).
The camera takes the picture.
Playing back still pictures
1 1 1 1
Press with the lens barrier closed.
The monitor turns on and displays the last picture taken.
2 2 2 2
Press .
3 3 3 3
Jumps to the picture 10 frames behind.
Press to cancel playback.
Displays the
The monitor and camera
next picture.
turn off.
Displays the
previous picture.
Jumps to the picture 10 frames ahead.

1 Getting started

Attaching the strap
1 1 1 1
Thread the short end of the strap through the
strap eyelet.
2 2 2 2
Thread the long end of the strap through the
loop that has already gone through the eyelet.
3 3 3 3
Pull the strap tight, making sure that it is
securely fastened and does not come loose.
Loading the batteries
1 1 1 1
Make sure that:
The lens barrier
is closed.
The lamp on the right
of the viewfinder is off.
2 2 2 2
Slide the battery compartment lock from
to .
3 3 3 3
Slide the battery compartment cover
in the direction of (the direction
indicated by the mark on the
cover), and lift it up in the direction of
4 4 4 4
Insert the batteries, making sure that they are correctly oriented as
shown in the illustration.
When using AA (R6) batteries When using CR-V3 lithium battery packs
There is a mark
showing the correct
way to insert the AA
batteries on the
bottom of the
camera.
VT367901
Recording movies
1 1 1 1
Open the lens barrier fully.
The camera turns on in the shooting mode.
2 2 2 2
Press .
The monitor turns on and the screen for selecting the shooting mode is displayed.
3 3 3 3
Press to select MOVIE, then press
.
4 4 4 4
Record the movie while observing your
subject on the monitor.
Press the shutter button fully to start recording.
Press the shutter button fully again to stop
recording.
Playing back movies
1 1 1 1
Press with the lens barrier closed.
The monitor turns on.
2 2 2 2
Press to display the desired picture with the
then press .
The top menu is displayed.
3 3 3 3
Press to select MOVIE PLAY.
4 4 4 4
Press to select MOVIE PLAYBACK.
The movie is played back after the orange lamp on the right of the viewfinder
blinks and the camera accesses the movie data. When the movie reaches the
end, the display returns automatically to the beginning of the movie.
5 5 5 5
Press to display the MOVIE
PLAYBACK menu. Then select the
desired operation and press .
PLAYBACK : Plays back the entire
movie again.
FRAME BY FRAME : Plays back the movie
manually one frame at a
time.
EXIT : Leaves the movie playback mode.
5 5 5 5
Close the battery compartment cover in the
direction of . While pressing the
mark, slide the cover in the direction of
If the battery compartment cover seems hard to
close, do not force it. With the battery compartment
cover shut, press the
the direction shown in the illustration.
Strap
eyelet
6 6 6 6
Slide the battery compartment lock from
Inserting the card (SmartMedia)
1 1 1 1
Make sure that:
The lens barrier
is closed.
The monitor is off.
2 2 2 2
Open the card cover.
3 3 3 3
Insert the card as far as it will go in the
direction shown in the illustration.
There is an arrow inside the card cover, indicating
the direction in which the card should be inserted.
4 4 4 4
Close the card cover securely until it clicks.
.
Removing the card
Hold the card with your fingertips and pull it out in the
direction of the arrow.
When using lithium
battery packs, insert
them so that the
"CAMEDIA" label on
Never open the card cover, or remove the card or the batteries while the
each battery is
camera is turned on. Doing so could destroy all data on the card. Destroyed
facing the lens side
data cannot be restored.
of the camera.
4 Protecting pictures (Protect)
You are recommended to protect important pictures to avoid accidentally erasing
them.
1 1 1 1
Press with the lens barrier closed.
The monitor turns on.
2 2 2 2
Press to select the picture you want to protect.
3 3 3 3
Press , then press
The mode menu is displayed.
4 4 4 4
Press to select the PLAY tab, then press
MOVIE
5 5 5 5
Press to select
press .
SELECt GO
6 6 6 6
Press to select ON, then
indicator,
press .
The selected picture is protected.
To close the menu, press
• The indicator is displayed at the top right of the protected picture.
• Protection on each picture remains even when the camera is turned off.
• Protected pictures cannot be erased by the single-frame/all-frame erase
MOVIE%PLAYBACK
function, but they can be all erased with the format function.
PLAYBACK
• Protection cannot be applied to pictures stored on a card with a write-
protect seal.
FRAME%BY%FRAME
EXIt
SELECt GO

2 Turning the power on/off

When shooting pictures
Power on:
.
Open the lens barrier fully.
The camera turns on in the shooting
mark firmly and push in mode. The lens extends and the
flash pops up.
If the lens does not extend when the
to .
lens barrier is opened, there is a
possibility that the cover is stuck in
the first click position.
Open the lens barrier until it clicks.
The monitor is off.
The lamp on the right
of the viewfinder is off.
When playing back pictures
Power on:
Press the
with the lens barrier closed.
The camera turns on in the playback
mode. The monitor turns on.
With the lens
barrier closed
5 Erasing pictures
Single-frame erase
1 1 1 1
Press
The monitor turns on.
2 2 2 2
Press
3 3 3 3
Press
.
The top menu is displayed.
4 4 4 4
Press
.
, then
5 5 5 5
Press
press
The picture is erased and the menu is closed.
OFF
ON
again.
Power off:
Close the lens barrier slightly
until it just touches the lens
barrel.
Wait until the lens is fully retracted,
then close the lens barrier
completely.
The camera turns off. (The monitor
also turns off.)
Press the flash down until it locks
into place to close it.
Power on Power off
Diopter adjustment dial
Power off:
(monitor) button Press the (monitor) button.
The camera turns off (the monitor
turns off).
Power on Power off
• While looking through the viewfinder, turn the diopter adjustment dial until
the AF target mark is clearly visible.
• To save battery power, the camera automatically enters the sleep mode
after about 3 minutes of non-operation. If the monitor is on, it will
automatically turn off. The camera activates again as soon as you lightly
press the shutter button or zoom lever. Whenever possible, turn the
camera off when you do not intend to take any pictures for a while.
with the lens barrier closed.
to select the picture you want to erase.
.
to select ERASE.
INFO MODE%MENU
ERASE
to select YES, then
ERASE
.
YES
NO
SELECt GO
• Erasure is not possible if the picture you want to erase is protected or a
write-protect seal is attached to the card. Before erasing, unprotect the
picture or remove the write-protect seal from the card.
• Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.