Connecting Netcam To A Modem - StarDot Technologies netcam XL User Manual

1.6

Connecting NetCam to a Modem

In order to use NetCam with an analog phone line, you will need the
Dial-Out NetCam package (CAM-XLxxx-02, which comes with an external
modem and cable), a dial-up ISP account, and an analog phone line.
 Install the StarDot Tools software by inserting the included
CD-ROM and running setup.exe.
 Connect one end of the null model serial cable to the S1 port of
NetCam and the other end into an available serial port on your PC.
 Connect the round end of the modem cable into the external modem
and plug the modem power supply into the modem (modem and
modem cable both included with remote package).
 Plug the DB9 end of the modem cable into the S0 port of NetCam.
 Run the StarDot Tools software and click on the Setup Wizard
button.
‘ Follow the steps in the Setup Wizard. When asked for modem type,
select 3JTech.
 Test your configuration locally first. Once successful, you can
place NetCam and the modem remotely and it will automatically dial
out to the Internet and upload images according to the set schedule.
External Modem (Included
with Dial-Out Package)
Plugs NetCam,
and analog phone line
Supplies
Into
Modem
NetCam XL
Modem Cable
Plug Power/
(Included) and into wall outlet
Power
Modem/Power Cable
(Included with Dial-Out Package)
To Internet
Used to connect NetCam
via Phone
to External Modem
Line & ISP
Cable
connect
Used to NetCam
Modem (Included)
Configuring Camera to a PC Serial Port for DB9-DB9 Null
Page 9