Trigger Properties - StarDot Technologies netcam XL User Manual

3.12 Trigger Properties

The trigger menu allows you set up NetCam to capture and upload
a series of images based on a triggered event using the input ports on the
back of the camera.
Trigger Overview
By connecting an alarm system, motion detector or other type of
sensor to the back of NetCam, it is possible to gather a series of images
when the sensor "triggers" the camera. Wiring examples can be found at
the end of this chapter.
TRIGGER
I/O Port
Select with I/O port your trigger source is connected to.
Page 34 NetCam XL