Advertisement
15900-407
Assembly:
In assembling the positioner, do not use the spool block or spool removed in the above procedure. Use only new
parts from the kit.
1. Orient the supplied spool block with the vent hole on the left side as shown in Figure 3.
2. Remove the new spool from its tubular container. Place a finger over the spool hole in the bottom of the spool
block to prevent the spool from falling through the block. Insert the spool, long journal first, into the top of the
spool block.
3. Select a gasket from the Output Capacity Kit; see Figure 4.
•
High temperature application or an ozone atmospheric condition - Select the Viton/Nomex gasket.
•
Other applications - Select the neoprene/nylon gasket.
Viton/Nomex gasket
has a V-notch or
color dot and a
distinct cinnamon
scent.
January 2009
FIGURE 3 Spool Clip Installation (enlarged)
FIGURE 4 Spool Block Gasket
Output Capacity Kit
3
Advertisement
