Safety Information - Elatec TWN4 MULTITECH NANO M Integration Manual

2 SAFETY INFORMATION

•
ELATEC TWN4 MultiTech Nano M is an electronic component and should be installed exclusively by a trained and qualified
personnel.
•
ELATEC recommends the integrators to follow general ESD protective measures during the installation of TWN4 MultiTech Nano M
into a host device, e.g. the use of an antistatic wristband or special gloves.
•
The integrator should not touch the antennas (if not shielded), printed circuit boards, connectors or other sensitive components on
TWN4 MultiTech Nano M.
•
Metallic materials on or in direct vicinity to the product might reduce the reading performance of the product. Refer to the installation
instructions for more information.
•
Before installing TWN4 MultiTech Nano M into a host device, the integrator should also make sure that he/she has read and
understood the ELATEC technical documentation related to TWN4 MultiTech Nano M, as well as the technical documentation
related to the host device. In particular, the instructions and safety information given in the user manual of TWN4 MultiTech Nano M
should be read carefully and listed in the technical documentation of the host manufacturer as well, as soon as these instructions
and safety information are required for a safe and proper use of the host device containing TWN4 MultiTech Nano M.
•
Any failure to comply with the safety information given in this document and in the user manual, is considered improper use.
ELATEC excludes any liability in case of improper use or faulty product installation.
© 2022 ELATEC GmbH – TWN4 MultiTech Nano M integration manual DocRev4 – 04/2022 Page 4 of 11