Casa Systems NetComm CloudMesh NL19MESH Backup And Restore Configuration Manual

Hide thumbs Also See for NetComm CloudMesh NL19MESH:

Backup and Restore Configuration

Back up your settings

This guide provides you with instructions on how to back up your gateway's configuration and restore it. We

recommend that you make a backup of the current working configuration in case you lose your settings or

need to perform a factory reset (i.e. reset default settings).

Connect your computer to the Gateway using a wired or wireless connection. We recommend

connecting via Ethernet cable.

Open a web browser (such as Google Chrome, Safari or Mozilla Firefox), type the following address

into the address bar and press Enter.

http://192.168.20.1

Enter the Gateway Login Username and Password printed on the label at the back of the Gateway and

click the Sign in button.

NL19MESH – Backup and Restore Configuration Guide

FA01364 v1.0 25 August 2021

NL19MESH Sign in dialog

Guide

NL19MESH

Table of Contents

Do you have a question about the NetComm CloudMesh NL19MESH and is the answer not in the manual?

Page 1 Backup and Restore Configuration Guide NL19MESH Back up your settings This guide provides you with instructions on how to back up your gateway’s configuration and restore it. We recommend that you make a backup of the current working configuration in case you lose your settings or need to perform a factory reset (i.e.
Page 2 2 of 3 Navigate to Management > Settings > Backup. Settings - Backup page Click the Backup Settings button. The configuration file “backupsettings.conf” is saved via your browser to the downloads folder configured in your browser. NL19MESH – Backup and Restore Configuration Guide FA01364 v1.0 25 August 2021...
Page 3 3 of 3 Restore your settings To restore a saved configuration: Navigate to Management-> Settings->Update. Tools – Update Settings page Click the Choose file button to browse for the “backupsettings.conf” file which was previously stored on your PC/Laptop. The words ‘No file chosen’ to the right of the Choose file button will change to the name of the backupsettings.conf file when it is ready for upload.