Related Manuals for Abtus MAX-HDBT62MV/P
Summary of Contents for Abtus MAX-HDBT62MV/P
- Page 1 4K HDBT 6x2 HDMI 2.0 Matrix Switcher Model: MAX-HDBT62MV/P ABtUS SIGAPORE PTE LTD www.abtussingapore.com rev.2021.11Nov.24 ABtUS SINGAPORE PTE LTD www.abtussingapore.com...
-
Page 2: Product Description
User Operation Guide PRODUCT DESCRIPTION The MAX-HDBT62MV/P is a 6x2 HDBaseT Matrix Switcher which can support resolution up to 4K@60Hz@4:4:4 HDR. It comprises of four HDMI inputs, One VGA input, one HDBT input, one HDBT output and one HDMI output. The matrix has two unbalanced audio inputs and outputs for audio embedding and audio de-embedding. -
Page 3: Panel Descriptions
PANEL DESCRIPTIONS Front Panel No. Name Description Built-in IR sensor for receiving IR signals from IR remote to control the matrix. Power The LED illuminates blue when the device is powered on, red when the device is in standby mode. INPUTS Total seven buttons with blue LED ● HDMI 1 input selector. - Page 4 User Operation Guide PANEL DESCRIPTIONS Rear Panel No. Name Description INPUTS A total of six video inputs and three audio inputs. ● HDMI 1~4: Connects to HDMI source devices. ● VGA: Connects to the VGA source. One stereo auxiliary audio input (3.5mm jack) can be embedded in the VGA video. ● HDBT: Connects to the HDBT output of a compatible transmitter to receive AV signal. ● LINE 1: Connects to audio source device for audio embedding.
-
Page 5: System Connection
SYSTEM CONNECTION Speaker Amplifier Central Third Control Party System Control System Device ABtUS MAX-HDBT62MV/P (back view) HDBT Transmitter *Specifications are subject to changes without notice. -
Page 6: Button Control
User Operation Guide BUTTON CONTROL Manual Switching When the switcher is in manual switching mode, the AUTO LED goes out. Please follow the below steps to switch input source to output channel. 1) Press any one of six input buttons to select input source, and the corresponding LED turns blue. 2) Press either HDBT or HDMI output button to select output channel, and the corresponding LED turns blue. 3) Press the input button again to confirm switching setting, otherwise, it will automatically confirm after three seconds. 4) The LED of both the input source and the output will blink thrice to indicate that the change was made. -
Page 7: System Operations
SYSTEM OPERATIONS IR Remote Control Connect IR receiver to the SYSTEM IR port, the switcher can be controlled by the following IR remote. 1) Power on/off the switcher. 2) Select input source. 3) Select output channel. 4) Audio output control: De-embedded audio 1 control: Mute, Volume Down ● and Volume Up. De-embedded audio 2 control: Mute, Volume Down ●... -
Page 8: Gui Control
User Operation Guide SYSTEM CONNECTION GUI Control The switcher can be controlled via TCP/IP. The default IP settings are: IP Address: 192.168.1.10 Subnet Mask: 255.255.255.0 Type 192.168.1.10 in the internet browser, it will enter the below log-in webpage: Default Username: admin Default Password: admin Type the user name and password, and then click Login to enter the section for video switching. - Page 9 SYSTEM CONNECTION Switching Tab 1.1 Signal Switching ● HDBT OUTPUT: Select an input source for HDBT output. Click AUTO to enable/disable auto switching mode. ● HDMI OUTPUT: Select an input source for HDMI output. Click AUTO to enable/disable auto switching mode. 1.2 Auto Switching Priority Setting ● Set the switching priority for auto switching mode. *Specifications are subject to changes without notice.
- Page 10 User Operation Guide SYSTEM CONNECTION 2 Audio Tab ● AUDIO EMBEDDEDING: ● Select or deselect the external audio from LINE 1 or LINE 2 to be embedded in HDBT output. ● Select or deselect the external audio from LINE 1 or LINE 2 to be embedded in HDMI output. ● Click once to select, click again to deselect ● AUDIO DE-EMBEDDEDING ● Select the HDBT output or HDMI output audio to be de-embedded through Audio 1 output.
- Page 11 SYSTEM CONNECTION 3.1 EDID Setting ● Select the compatible built-in EDID for the selected input source. ● Upload user-define EDID using the following steps: Step 1: Prepare the EDID file (.bin) on the control PC. Step 2: Select the user-defined option. Step 3: Click the black box , and then select the EDID file (.bin) accordingly. Step 4: Click APPLY to upload the user-defined EDID. *Specifications are subject to changes without notice.
- Page 12 User Operation Guide SYSTEM CONNECTION 3.2 Scaling Setting ● Enable or disable HDBT output downscaling. The 4K input video can be downscaled to 1080p output when HDBT output downscaling is enabled. ● Enable or disable HDMI output upscaling. The 1080p input video can be upscaled to 4K output when HDMI output upscaling is enabled. 3.3 PoC Setting ● Select to enable/disable PoC for HDBT output *Specifications are subject to changes without notice.
- Page 13 3.4 Fan Speed Setting ● OFF: Turns off the built-in fan of the matrix switcher ● LOW: Sets the fan speed to low ● High: Sets the fan speed to high *Specifications are subject to changes without notice.
- Page 14 User Operation Guide SYSTEM CONNECTION 4 CEC Tab If the input source devices and display devices support CEC, they can be controlled by the below control buttons to replace IR remote. 1) Input Source Control ● Select the input source which needs to be controlled, then press the desired function buttons. 2) Output Display Control ● Select the output display which needs to be controlled, then press the desired function buttons. *Specifications are subject to changes without notice.
- Page 15 SYSTEM CONNECTION 5. RS-232 Tab ● Select Local or HDBT Out (passthrough) control mode. ● Local: Send RS232 commands to control the local third-party device which is connected to the RS232 port of the switcher. ● HDBT Out: Send RS232 commands to remote device via HDBT. ● Set the command format to HEX or ASCII. ● Baud Rate: Select the baud rate of the device.
- Page 16 User Operation Guide SYSTEM CONNECTION 6. Interface Tab ● Title Bar Label: Modify the name of matrix switcher. ● INPUT: Modify the label of input sources. ● OUTPUT: Modify the label of outputs. 7. Network Tab ● Select Static IP or Dynamic Host Configuration Protocol (DHCP). ● Modify the static IP Address, Subnet Mask, and Gateway if required. *Specifications are subject to changes without notice.
- Page 17 SYSTEM CONNECTION 8. Access Tab ● Credentials: Modify the login password. ● Version: Shows the GUI and firmware version. *Specifications are subject to changes without notice.
- Page 18 User Operation Guide SYSTEM CONNECTION Auto-trigger CEC Both outputs can send power on or power off CEC commands to the TV automatically by detecting source inputs. User can choose one output or both via RS232 command. Please refer to page 19 (Set auto TV power command) for more details. Power on Command When the first source input is detected, the switcher will automatically send CEC command to turn on the TV when the set auto TV power option is enable on the particular output.
-
Page 19: System Control Commands
4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher SYSTEM CONTROL COMMANDS 9.1 System Control Commands Command Example and Command Description Feedback Lock/ unlock front panel buttons. >SetKeyLock Off >SetKeyLock [Lockparam] = On, Off [Lockparam] On - Locked <KeyLock Off Off - Unlock Get the locking status of front panel >GetKeyLock <KeyLock Off... - Page 20 User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback 2: HDMI output 3: Both HDBT and HDMI outputs 4: No output >GetAutoTVPower Get the outputs of auto-trigger power >GetAutoTVPower on/off CEC command. <AutoTVPower 1 9.2 Signal Switching Commands Command Example and...
- Page 21 SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback [Prioparam1] mode. 02 01 [Prioparam2] [Prioparam1] ~ [Prioparam6] = 01~06 [Prioparam3] 01 = HDMI IN 1 [Prioparam4] 02 = HDMI IN 2 <AutoSwitchPriority 06 05 04 [Prioparam5] 03 = HDMI IN 3 03 02 01...
- Page 22 User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback >GetVGAVideoType >GetVGAVideoType Get video type of VGA input. <VGAVideoType VGA Set the resolution of VGA. >SetVGAOutResolution 01 >SetVGAOutResolution Resparam Resparam= 01,02,03,04,05,06 - 1920x1080 >SetVGAOutResolution - 1920x1200...
- Page 23 SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback same source as the video. [Outputparam] = A01, A02, 01, 02, Null A01 - Output AUDIO 1 A02 - Output AUDIO 2 01 - The audio of HDBT output <Audio OUT A01 IN S01 02 - The audio of HDMI output <Audio OUT A02 IN S02...
- Page 24 User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback 02 - HDMI OUTPUT BYPASS 03 - 1920x1080@60 8bit Stereo Audio 04 - 1920x1080@60 8bit High Definition Audio 05 - 3840x2160@30 8bit Stereo Aduio 06 - 3840x2160@30 Deep Color HDR LPCM 6CH 07 - 3840x2160@60 4:2:0 Deep Color...
-
Page 25: Cec Control Commands
SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback [Baudparam] [Baudparam] = 9600, 19200, 38400, <RS232Baud 115200 57600, 115200. >GetRS232Baud >GetRS232Baud Get the RS232 baud rate. <RS232Baud 115200 Enable/ Disable auto downscaling >SetAutoDownScaling On function of HDBT output. - Page 26 User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback 05 - HDBT IN Volume down for input source. >SetCecSrcVolDown 01 [Inparam] = 01 ~ 05 01 - HDMI IN1 >SetCecSrcVolDown 02 - HDMI IN2 [Inparam] 03 - HDMI IN3...
- Page 27 SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback Right arrow button for input source. >SetCecSrcRight 01 [Inparam] = 01 ~ 05 01 - HDMI IN1 >SetCecSrcRight 02 - HDMI IN2 [Inparam] 03 - HDMI IN3 <CecSrcRight 01 04 - HDMI IN4 05 - HDBT IN...
- Page 28 User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback 02 - HDMI IN2 03 - HDMI IN3 <CecSrcStop 01 04 - HDMI IN4 05 - HDBT IN Play button for the input source. [Inparam] = 01 ~ 05 >SetCecSrcPlay 01 01 - HDMI IN1...
- Page 29 SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback Forward button for the input source. [Inparam] = 01 ~ 05 >SetCecSrcFastForward 01 01 - HDMI IN1 >SetCecSrcFastForward 02 - HDMI IN2 [Inparam] 03 - HDMI IN3 <CecSrcFastForward 01 04 - HDMI IN4 05 - HDBT IN...
- Page 30 User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback [Outparam] [Outparam]= 01, 02 01 - HDBT OUT <CecDisplayVOLDown 01 02 - HDMI OUT 9.6 Third-party Device Control Commands Command Example and Command Description Feedback...
-
Page 31: Firmware Upgrade
FIRMWARE UPGRADE 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher 10. Firmware Upgrade Please follow the steps as below to upgrade firmware by the FIRMWARE port on the rear panel: 1) Prepare the latest upgrade file (.bin) and rename it as “FW_MERG.bin” on PC. 2) Power off the switcher, and connect the FIRMWARE port of switcher to the PC with USB cable. -
Page 32: Specifications
User Operation Guide SPECIFICATIONS VIDEO INPUT Input 4×HDMI 1×VGA 1×HDBT Input Connector 4×Type-A female HDMI 1×15-pin female VGA 1×RJ45 Video input Video Resolution Up to 4K@60Hz 4:4:4 HDR (HDMI) Up to 1920x1200@60Hz (VGA) Up to 4K@60Hz 4:2:0 (HDBT) VIDEO OUTPUT Output 1×HDBaseT 1×HDMI Output Connector 1×RJ45 1×Type-A female HDMI Video output Video Resolution Up to 4K@60Hz 4:4:4 HDR (HDMI) Up to 4K@60Hz 4:2:0 (HDBT) AUDIO INPUT... - Page 33 Operation Temperature -5 to +55°C (+23° to +131°F) Storage Temperature -25 to +70°C (-13° to +158°F) Relative Humidity 10% to 90%, Non-condensing External Power Supply Input: AC 100~240V, 50/60Hz; Output: 24V DC 2.71A Power Consumption 45W (Max) Dimension (W*H*D) 250 mm x 44 mm x 220 mm Net weight 1.7 kg ABtUS SINGAPORE PTE LTD www.abtussingapore.com...