User Operation Guide PRODUCT DESCRIPTION The MAX-HDBT62MU/P is a 6x2 HDBaseT Matrix Switcher which can support resolution up to 4K@60Hz@4:4:4 HDR. It comprises of four HDMI inputs, one USB-C input, one HDBT input, one HDBT output and one HDMI output. The matrix has two unbalanced audio inputs and outputs for audio embedding and audio de-embedding.
PANEL DESCRIPTIONS Front Panel No. Name Description Built-in IR sensor for receiving IR signals from IR remote to control the matrix. Power The LED illuminates blue when the device is powered on, red when the device is in standby mode. INPUTS Total seven buttons with blue LED ● HDMI 1 input selector.
Page 4
User Operation Guide PANEL DESCRIPTIONS Rear Panel No. Name Description INPUTS A total of six video inputs and three audio inputs. ● HDMI 1~4: Connects to HDMI source devices. ● USB-C Connects to USB-C source devices. ● HDBT: Connects to the HDBT output of a compatible transmitter to receive AV signal. ● LINE 1: Connects to audio source device for audio embedding.
SYSTEM CONNECTION Speaker Amplifier Central Third Control Party System Control System Device ABtUS MAX-HDBT62MU/P (back view) HDBT Transmitter *Specifications are subject to changes without notice.
User Operation Guide BUTTON CONTROL Manual Switching When the switcher is in manual switching mode, the AUTO LED goes out. Please follow the below steps to switch input source to output channel. 1) Press any one of six input buttons to select input source, and the corresponding LED turns blue. 2) Press either HDBT or HDMI output button to select output channel, and the corresponding LED turns blue.
SYSTEM OPERATIONS IR Remote Control Connect IR receiver to the SYSTEM IR port, the switcher can be controlled by the following IR remote. 1) Power on/off the switcher. 2) Select input source. 3) Select output channel. 4) Audio output control: De-embedded audio 1 control: Mute, Volume Down ●...
User Operation Guide SYSTEM CONNECTION GUI Control The switcher can be controlled via TCP/IP. The default IP settings are: IP Address: 192.168.1.10 Subnet Mask: 255.255.255.0 Type 192.168.1.10 in the internet browser, it will enter the below log-in webpage: Default Username: admin Default Password: admin Type the user name and password, and then click Login to enter the section for video switching.
Page 9
SYSTEM CONNECTION Switching Tab 1.1 Signal Switching ● HDBT OUTPUT: Select an input source for HDBT output. Click AUTO to enable/disable auto switching mode. ● HDMI OUTPUT: Select an input source for HDMI output. Click AUTO to enable/disable auto switching mode. 1.2 Auto Switching Priority Setting ● Set the switching priority for auto switching mode. *Specifications are subject to changes without notice.
Page 10
User Operation Guide SYSTEM CONNECTION 2 Audio Tab ● AUDIO EMBEDDEDING: ● Select or deselect the external audio from LINE 1 or LINE 2 to be embedded in HDBT output. ● Select or deselect the external audio from LINE 1 or LINE 2 to be embedded in HDMI output. ● Click once to select, click again to deselect ● AUDIO DE-EMBEDDEDING ● Select the HDBT output or HDMI output audio to be de-embedded through Audio 1 output.
Page 11
SYSTEM CONNECTION 3.1 EDID Setting ● Select the compatible built-in EDID for the selected input source. ● Upload user-define EDID using the following steps: Step 1: Prepare the EDID file (.bin) on the control PC. Step 2: Select the user-defined option. Step 3: Click the black box , and then select the EDID file (.bin) accordingly. Step 4: Click APPLY to upload the user-defined EDID. *Specifications are subject to changes without notice.
Page 12
User Operation Guide SYSTEM CONNECTION 3.2 Scaling Setting ● Enable or disable HDBT output downscaling. The 4K input video can be downscaled to 1080p output when HDBT output downscaling is enabled. ● Enable or disable HDMI output upscaling. The 1080p input video can be upscaled to 4K output when HDMI output upscaling is enabled. 3.3 PoC Setting ● Select to enable/disable PoC for HDBT output *Specifications are subject to changes without notice.
Page 13
3.4 Fan Speed Setting ● OFF: Turns off the built-in fan of the matrix switcher ● LOW: Sets the fan speed to low ● High: Sets the fan speed to high *Specifications are subject to changes without notice.
Page 14
User Operation Guide SYSTEM CONNECTION 4 CEC Tab If the input source devices and display devices support CEC, they can be controlled by the below control buttons to replace IR remote. 1) Input Source Control ● Select the input source which needs to be controlled, then press the desired function buttons. 2) Output Display Control ● Select the output display which needs to be controlled, then press the desired function buttons.
Page 15
SYSTEM CONNECTION 5. RS-232 Tab ● Select Local or HDBT Out (passthrough) control mode. ● Local: Send RS232 commands to control the local third-party device which is connected to the RS232 port of the switcher. ● HDBT Out: Send RS232 commands to remote device via HDBT. ● Set the command format to HEX or ASCII.
Page 16
User Operation Guide SYSTEM CONNECTION 6. Interface Tab ● Title Bar Label: Modify the name of matrix switcher. ● INPUT: Modify the label of input sources. ● OUTPUT: Modify the label of outputs. 7. Network Tab ● Select Static IP or Dynamic Host Configuration Protocol (DHCP). ● Modify the static IP Address, Subnet Mask, and Gateway if required. *Specifications are subject to changes without notice.
Page 17
SYSTEM CONNECTION 8. Access Tab ● Credentials: Modify the login password. ● Version: Shows the GUI and firmware version. *Specifications are subject to changes without notice.
Page 18
User Operation Guide SYSTEM CONNECTION Auto-trigger CEC Both outputs can send power on or power off CEC commands to the TV automatically by detecting source inputs. User can choose one output or both via RS232 command. Please refer to page 19 (Set auto TV power command) for more details. Power on Command When the first source input is detected, the switcher will automatically send CEC command to turn on the TV when the set auto TV power option is enable on the particular output.
4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher SYSTEM CONTROL COMMANDS 9.1 System Control Commands Command Example and Command Description Feedback Lock/ unlock front panel buttons. >SetKeyLock Off >SetKeyLock [Lockparam] = On, Off [Lockparam] On - Locked <KeyLock Off Off - Unlock Get the locking status of front panel >GetKeyLock <KeyLock Off...
Page 20
User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback 2: HDMI output 3: Both HDBT and HDMI outputs 4: No output >GetAutoTVPower Get the outputs of auto-trigger power >GetAutoTVPower on/off CEC command. <AutoTVPower 1 9.2 Signal Switching Commands Command Example and...
Page 24
User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback <EDID >GetEDID Get the EDID of input source. IN 01 02 03 04 STA 08 08 08 08" Upgrade the user-defined EDID. >SetUpdateEDID 01 >SetUpdateEDID [EDIDparam] = 01, 02...
SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback Get auto upscaling function of HDMI >GetAutoUpScaling <AutoUpScaling On output. Enable/ Disable the PoC of HDBT >SetPoC On output. >SetPoC [param] [param] = On, Off On - Enable <HDBTOutPoC On Off - Disable...
Page 26
User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback 01 - HDMI IN1 02 - HDMI IN2 03 - HDMI IN3 <CecSrcUp 01 04 - HDMI IN4 05 - HDBT IN Down arrow button for input source.
Page 27
SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback 05 - HDBT IN Power on the input source. [Inparam] = 01 ~ 05 >SetCecSrcOn 01 01 - HDMI IN1 >SetCecSrcOn [Inparam] 02 - HDMI IN2 03 - HDMI IN3 <CecSrcOn 01 04 - HDMI IN4...
Page 28
User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback Previous button for the input source. [Inparam] = 01 ~ 05 >SetCecSrcPrev 01 01 - HDMI IN1 >SetCecSrcPrev 02 - HDMI IN2 [Inparam] 03 - HDMI IN3 <CecSrcPrev 01...
Page 29
SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback [Outparam] [Outparam]= 01, 02 01 - HDBT OUT <CecDisplayOn 01 02 - HDMI OUT Power off the display device. >SetCecDisplayOff 01 >SetCecDisplayOff [Outparam]= 01, 02 [Outparam] 01 - HDBT OUT <CecDisplayOff 01...
Page 30
User Operation Guide SYSTEM CONTROL COMMANDS 4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher Command Example and Command Description Feedback xxxx = ASCII string Send HEX string to the switcher RS232 control port or to remote via HDBT. [param1] = 01,02 >SendHEX_01,01:31 32 33 34 01 - Switcher RS232 control port 02 - Remote...
4K 6X2 HDMI 2.0 HDBaseT Matrix Switcher FIRMWARE UPGRADE 10. Firmware Upgrade Please follow the steps as below to upgrade firmware by the FIRMWARE port on the rear panel: 1) Prepare the latest upgrade file (.bin) and rename it as “FW_MERG.bin” on PC. 2) Power off the switcher, and connect the FIRMWARE port of switcher to the PC with USB cable.
User Operation Guide SPECIFICATIONS VIDEO INPUT Input 4×HDMI 1xUSB-C 1×HDBT Input Connector 4×Type-A female HDMI 1xUSB-C female 1×RJ45 Video input Video Resolution Up to 4K@60Hz 4:4:4 HDR Up to 4K@60Hz 4:2:0 (HDBT) VIDEO OUTPUT Output 1×HDBaseT 1×HDMI Output Connector 1×RJ45 1×Type-A female HDMI Video output Video Resolution Up to 4K@60Hz 4:4:4 HDR (HDMI)
Page 33
-25 to +70°C (-13° to +158°F) Relative Humidity 10% to 90%, Non-condensing External Power Supply Input: AC 100~240V, 50/60Hz; Output: 24V DC 5A Power Consumption 45W (Max) Dimension (W*H*D) 250 mm x 44 mm x 220 mm Net weight 1.7 kg ABtUS SINGAPORE PTE LTD www.abtussingapore.com...