Table of Contents
Advertisement
SR-TUN14H
Section 3: Interface and Main Harness Connections (cont.)
Step 4
Referencing the sticker on the
back, connect the 12-pin connector (4)
to the appropriate port. Amplified
if the truck has a factory amplifier,
Non-Amplified for base audio.
Step 7
From the SR-TUN14H kit, connect the
RPA-VA1 Video Adapter to the 6-pin
plug on the main harness.
Step 10
Attach the PAC interface to the
Module Bracket (H_MODULE_BRKT)
using supplied zip ties in four locations.
®
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. PAC-audio.com
Pacific Accessory Corporation
4
Connect the OEM Camera RCA on
the main harness to the Reverse
Camera In RCA on the HEIGH10
Connect the blue wire on the
BAA44 Antenna Adapter to the blue
POWER ANTENNA + lead on the
Module Bracket
(H_MODULE_BRKT)
HEIGH10 24-pin
A/V harness
Step 5
24-pin A/V harness.
Step 8
main harness.
Stinger HEIGH10 Radio Replacement Kit
®
for 2014-2021 Toyota Tundra
HEIGH10 24-pin
A/V harness
Step 6
For Tundra's using the
SR-TAC16H-HAR harness, connect
the pair of RCA's labeled AUX
AUDIO to the AUX IN RCA's on the
HEIGH10's 24-pin A/V Harness.
Multi-Camera Harness
Step 9
Connect the SPEED SEN wire
on the HEIGH10's 10-pin Multi-
Camera harness to the SPEED
SEN wire on the main harness.
Rev: V2
Date:032222
HEIGH10 10-pin
Page 5
Advertisement
Table of Contents
