Section 2: In-Vehicle Harness Preparation; Section 3: Interface And Main Harness Connections - PAC SR-TUN14H Manual

SR-TUN14H
Stinger HEIGH10 Radio Replacement Kit
®
for 2014-2021 Toyota Tundra

Section 2: In-Vehicle Harness Preparation

USB-TY1 GPS-03
SXM
OR
GPS
USB
USB-TY3
SAT-01
Step 1 Step 2
Step 3
From the SR-TAC16H kit, locate
From the SR-TAC16H kit, locate
Connect the adapters to the matching
the GPS Antenna Adapter and
the correct USB adapter that matches
connectors removed from the factory
Satellite Antenna Adapter if
the factory USB cable in the vehicle.
radio.
installing a SXM tuner.

Section 3: Interface and Main Harness Connections

OR
Step 2
Step 1
Set dip switch #3 to the down (ON)
Referencing the radio plugs in the vehicle, determine which
position on the side of the
Main Harness will be used: the SR-TAC16H-HAR (4-Plug) or
RP4.2-TY11 interface.
the SR-TAC19H-HAR (3-Plug) Main Harness.
All other switches up (OFF).
Step 3
3
Plug in the 3-pin (1), 20-pin (2)
and the 24-pin (3) plugs on the
main harness to the appropriate
1 2
ports on the interface.
Rev: V2
®
Page 4
© 2022 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global. PAC-audio.com
Date:032222
Pacific Accessory Corporation