TVS KING KARGO Manual page 58

Gear cable inner replacement
Removal
● Loosen lock nut (A) and adjuster nut (B) at engine end
● Remove cover handle bar ( C ) by loosening two screws
● Remove the lock clip ( D )
● Remove the handle bar sleeve and take out pulley gear
shift.
● Pull out cable inner gear shift
● Loosen pulley gear shift nut at engine end and take the
pulley out
Gear cable assembly at engine end.
Self maintenance procedure
Gear cable assembly at handlebar end.
Assembly
● Connect gear cable inner to pulley gear shifter at handle
bar end.
● Insert cable inner through cable outer and adjuster
● Take out adjuster gearshift cable from stopper
A
● Loosen pulley nut and take out pulley
B
● Pull out cable inner and connect to pulley at engine end
through pinge bolts
● Apply oil on inner and route it through outer and holes
provided in the pulley gear shifter and tighten pinge bolts.
056
C
D
D