TVS KING KARGO Manual page 51

Spare wheel removal
Mount the spare wheel on the bracket properly and tighten
the nuts thoroughly, close the spare wheel with cover.
Tyre and wheel changing procedure.
Removal
● Apply parking brake
● Loosen the wheel retaining nuts. (2 nos.)
● Take out the Jack & Rod from RH Side Utility Box.
● Place the jack as shown in the fig. (For removing front
wheel B (Cross Member ). rear wheel A. (Trailing Arm)
● Lift up the vehicle until the wheel clears the ground.
● Remove the retaining nuts and take out the wheel.
Self maintenance procedure
NOTE
Assembly
● While assembling the spare wheel tighten the wheel nuts
diagonally.
● Lower the vehicle slowly to the ground then tighten the
nuts fully to the recommended torque.
Tool name
Ring spanner, Socket spanner
Tyre Pressure
Driver alone
Load
(kerb with driver)
FR FR
Pressure
(psi)
30 30
049
Tool size
17mm
Laden - 400 kg Above - 400 kg
payload payload
(Driver + 325kg) >(Driver + 400kg)
FR FR FR
30 50 45
FR
60